logo

CuriousTab

CuriousTab

Discussion

Home ‣ Mechanical Engineering ‣ Heat Transfer, Refrigeration and Air Conditioning Comments
  • Question

  • In a spray washing system, if the temperature of water is higher than the dry bulb temperature of entering air, then the air is


  • Options
  • A. heated and dehumidified
  • B. heated and humidified
  • C. cooled and humidified
  • D. cooled and dehumidified

  • Correct Answer
  • heated and humidified 

    • Heat Transfer, Refrigeration and Air Conditioning problems

    Search Results

    • 1. In absorption vapour systems, the refrigerant widely used is R-12.

    • Options
    • A. Correct
    • B. Incorrect
      • Discuss
    • 2. The colour of the flame of halide torch, in case of leakage of freon refrigerant, will change to

    • Options
    • A. bright green
    • B. yellow
    • C. red
    • D. orange
      • Discuss
    • 3. The wet bulb temperature during sensible cooling of air

    • Options
    • A. remains constant
    • B. increases
    • C. decreases
      • Discuss
    • 4. A grey body is one whose absorptivity does not vary with temperature and wave length of the incident ray.

    • Options
    • A. True
    • B. False
      • Discuss
    • 5. The emissivity of a polished silver body is __________ as compared to black body.

    • Options
    • A. same
    • B. low
    • C. very low
    • D. high
      • Discuss
    • 6. The final relative humidity of the air during cooling and dehumidification is generally __________ than that of entering air.

    • Options
    • A. lower
    • B. higher
      • Discuss
    • 7. The atmospheric air at dry bulb temperature of 15°C enters a heating coil maintained at 40°C. The air leaves the heating coil at 25°C. The by-pass factor of the heating coil is

    • Options
    • A. 0.376
    • B. 0.4
    • C. 0.6
    • D. 0.67
      • Discuss
    • 8. Prandtl number (PN) is given by PN = ?.cp/k.

    • Options
    • A. Yes
    • B. No
      • Discuss
    • 9. The transfer of heat by molecular collision is smallest in

    • Options
    • A. solids
    • B. liquids
    • C. gases
    • D. none of these
      • Discuss
    • 10. A composite slab has two layers of different materials with thermal conductivities k1 and k2. If each layer has the same thickness, then the equivalent thermal conductivity of the slab will be

    • Options
    • A. k1 k2
    • B. k1 + k2
    • C.
    • D.
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.