logo

CuriousTab

CuriousTab

Discussion


Home Electronics Semiconductor Principles Comments

  • Question
  • Solid state devices were first manufactured during:


  • Options
  • A. World War 2
  • B. 1904
  • C. 1907
  • D. 1960

  • Correct Answer
  • 1960 


  • Semiconductor Principles problems


    Search Results


    • 1. When and who discovered that more than one transistor could be constructed on a single piece of semiconductor material:

    • Options
    • A. 1949, William Schockley
    • B. 1955, Walter Bratten
    • C. 1959, Robert Noyce
    • D. 1960, John Bardeen
    • Discuss
    • 2. Elements with 1, 2, or 3 valence electrons usually make excellent:

    • Options
    • A. conductors
    • B. semiconductors
    • C. insulators
    • D. neutral
    • Discuss
    • 3. How many valence electrons are in every semiconductor material?

    • Options
    • A. 1
    • B. 2
    • C. 3
    • D. 4
    • Discuss
    • 4. What can a semiconductor sense?

    • Options
    • A. magnetism
    • B. temperature
    • C. pressure
    • D. all of the above
    • Discuss
    • 5. What electrical characteristic of intrinsic semiconductor material is controlled by the addition of impurities?

    • Options
    • A. conductivity
    • B. resistance
    • C. power
    • D. all of the above
    • Discuss
    • 6. What causes the depletion region?

    • Options
    • A. doping
    • B. diffusion
    • C. barrier potential
    • D. ions
    • Discuss
    • 7. Electron pair bonding occurs when atoms:

    • Options
    • A. lack electrons
    • B. share holes
    • C. lack holes
    • D. share electrons
    • Discuss
    • 8. What is the most significant development in electronics since World War II?

    • Options
    • A. the development of color TV
    • B. the development of the diode
    • C. the development of the transistor
    • D. the development of the TRIAC
    • Discuss
    • 9. When testing an n-channel D-MOSFET, resistance G to D = ∞, resistance G to S = ∞, resistance D to SS = ∞ and 500 Ω, depending on the polarity of the ohmmeter, and resistance D to S = 500 Ω. What is wrong?

    • Options
    • A. short D to S
    • B. open G to D
    • C. open D to SS
    • D. nothing
    • Discuss
    • 10. When the JFET is no longer able to control the current, this point is called the:

    • Options
    • A. breakdown region
    • B. depletion region
    • C. saturation point
    • D. pinch-off region
    • Discuss


    Comments

    There are no comments.

Enter a new Comment