logo

CuriousTab

CuriousTab

Discussion


Home Electronics Diodes and Applications Comments

  • Question
  • When checking a diode, low resistance readings both ways indicate the diode is:


  • Options
  • A. open
  • B. satisfactory
  • C. faulty
  • D. not the problem

  • Correct Answer
  • faulty 


  • Diodes and Applications problems


    Search Results


    • 1. List three diode packages:

    • Options
    • A. clip package, DIP, small current package
    • B. DIP, small current package, large current package
    • C. small current package, large current package, and SIP
    • D. small current package, large current package, clip package
    • Discuss
    • 2. If a 169.7 V half-wave peak has an average voltage of 54 V, what is the average of two full-wave peaks?

    • Options
    • A. 119.9 V
    • B. 108.0 V
    • C. 115.7 V
    • D. 339.4 V
    • Discuss
    • 3. Why is heat produced in a diode?

    • Options
    • A. due to current passing through the diode
    • B. due to voltage across the diode
    • C. due to the power rating of the diode
    • D. due to the PN junction of the diode
    • Discuss
    • 4. At any given time in an intrinsic piece of semiconductor material at room temperature

    • Options
    • A. electrons drift randomly
    • B. recombination occurs
    • C. holes are created
    • D. All of the above
    • Discuss
    • 5. The dc current through each diode in a bridge rectifier equals:

    • Options
    • A. the load current
    • B. half the dc load current
    • C. twice the dc load current
    • D. one-fourth the dc load current
    • Discuss
    • 6. With a 12 V supply, a silicon diode, and a 370-ohm resistor in series, what voltage will be dropped across the diode?

    • Options
    • A. 0.3 V
    • B. 0.7 V
    • C. 0.9 V
    • D. 1.4 V
    • Discuss
    • 7. A characteristic curve is the result of a current versus voltage plot of diode activity, which begins at the:

    • Options
    • A. 3rd quadrant
    • B. current plot
    • C. graph origin
    • D. voltage plot
    • Discuss
    • 8. What circuit activity may shift a characteristic curve so that diode operating points are different?

    • Options
    • A. higher power (heat)
    • B. higher resistance
    • C. lower voltage
    • D. lower current
    • Discuss
    • 9. What is wrong with this circuit?


    • Options
    • A. The zener is open.
    • B. The zener is shorted.
    • C. nothing
    • D. not enough data
    • Discuss
    • 10. What is the current through the diode?


    • Options
    • A. 1 mA
    • B. 0.975 mA
    • C. 0.942 mA
    • D. 0.0 mA
    • Discuss


    Comments

    There are no comments.

Enter a new Comment