logo

CuriousTab

CuriousTab

Discussion


Home Electronics Series Circuits Comments

  • Question
  • In a series circuit, the voltage measured across a short will be:


  • Options
  • A. source voltage
  • B. infinite voltage
  • C. zero volts
  • D. the normal voltage drop

  • Correct Answer
  • zero volts 


  • Series Circuits problems


    Search Results


    • 1. What is the current flow through R1, R2, and R3?


    • Options
    • A. 1A, 1A, 1A
    • B. 1A, 2A, 3A
    • C. 3A, 3A, 3A
    • D. 3A, 2A, 1A
    • Discuss
    • 2. How will an open resistor affect a series circuit?

    • Options
    • A. Current will flow around the open resistor.
    • B. The open resistor will drop 0 V.
    • C. Total resistance will decrease.
    • D. No current will flow in the circuit.
    • Discuss
    • 3. 

      How much current flows in the circuit in the given circuit?


    • Options
    • A. 20 µA
    • B. 60 µA
    • C. 80 µA
    • D. 140 µA
    • Discuss
    • 4. A series circuit current:

    • Options
    • A. remains the same through each component
    • B. is the same as the individual resistances
    • C. is subtracted by each component
    • D. varies through each component
    • Discuss
    • 5. Kirchhoff's voltage law states that:

    • Options
    • A. the sum of the voltage drops in a series circuit is equal to the total applied voltage
    • B. the algebraic sum of the resistances is equal to the sum of the voltages
    • C. the algebraic sum of the individual currents around a closed loop is zero
    • D. the voltages developed across each element in a series circuit are identical
    • Discuss
    • 6. What is the total power in the circuit?


    • Options
    • A. 170 mW
    • B. 1.7 W
    • C. 17 W
    • D. 170 W
    • Discuss
    • 7. Which equation determines individual resistor voltage drop?

    • Options
    • A. V x R
    • B. I2 x R
    • C. V x I
    • D. I x R
    • Discuss
    • 8. What is the total resistance?


    • Options
    • A. 0 kΩ; there is no current
    • B. 2 kΩ; the average
    • C. 3 kΩ; the largest
    • D. 6 kΩ; the sum
    • Discuss
    • 9. When 50 V is applied to four series resistors, 100 µA flows. If R1 = 12 kΩ , R2 = 47 kΩ, and R3 = 57 kΩ, what is the value of R4?

    • Options
    • A. 38.4 kΩ
    • B. 3.84 kΩ
    • C. 384 kΩ
    • D. 3.84 MΩ
    • Discuss
    • 10. With a 900 V source, voltage is divided across 3 series resistors of 300 V, 280 V, and:

    • Options
    • A. 30 V
    • B. 270 V
    • C. 320 V
    • D. 900 V
    • Discuss


    Comments

    There are no comments.

Enter a new Comment