Discussion
Home ‣ Chemical Engineering ‣ Petroleum Refinery Engineering Comments
- Question
The coking process normally mostly used in Indian oil refineries is the __________ coking process.
Options- A. delayed
- B. flexi
- C. fluid
- D. contact
- Correct Answer
- delayed
- 1. Which of the following has the lowest viscosity (at a given temperature) of all?
Options- A. Naphtha
- B. Kerosene
- C. Diesel
- D. Lube oil Discuss
- 2. Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene.
Options- A. Smoking tendency of hydrocarbons increases in the order : paraffins ? isoparaffins ? naphthenes ? aromatics.
- B. Smoking tendency of paraffins increases with decrease in its molecular weight.
- C. Smoking tendency of naphthenes decreases with its increasing molecular weight & also on addition of double bond.
- D. Smoking tendency of aromatics decreases with increase in its molecular weight. Discuss
- 3. Which is the most undesirable component in kerosene?
Options- A. Aromatics
- B. i-paraffins
- C. n-paraffins
- D. Naphthenes Discuss
- 4. Illuminating characteristics of kerosene is expressed by its
Options- A. smoke point
- B. aniline point
- C. luminosity number
- D. aromatic content Discuss
- 5. Flash point of an oil gives an idea of the
Options- A. nature of boiling point diagram of the system.
- B. amount of low boiling fraction present.
- C. explosion hazards.
- D. all (a), (b) and (c). Discuss
- 6. Tanks used for the storage of petroleum products (which are inflammable) should be painted with a __________ paint.
Options- A. black
- B. white
- C. red
- D. yellow Discuss
- 7. Catalyst used in catalytic reforming is
Options- A. platinum on alumina
- B. nickel
- C. iron
- D. aluminium chloride Discuss
- 8. __________ converts n-paraffins to i-paraffins.
Options- A. Alkylation
- B. Polymerisation
- C. Isomerisation
- D. none of these Discuss
- 9. Solution used in Doctor's treatment for the removal of mercaptans is
Options- A. sodium hydroxide
- B. sodium plumbite
- C. cupric chloride
- D. potassium isobutyrate Discuss
- 10. Pick out the undesirable property for a solvent meant for dewaxing of lube oil.
Options- A. Complete miscibility with oil.
- B. High solubility of wax in the solvent.
- C. Both (a) and (b).
- D. Neither (a) nor (b). Discuss
Petroleum Refinery Engineering problems
Search Results
Correct Answer: Naphtha
Correct Answer: Smoking tendency of paraffins increases with decrease in its molecular weight.
Correct Answer: Aromatics
Correct Answer: luminosity number
Correct Answer: all (a), (b) and (c).
Correct Answer: white
Correct Answer: platinum on alumina
Correct Answer: Isomerisation
Correct Answer: sodium plumbite
Correct Answer: Both (a) and (b).
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.