logo

CuriousTab

CuriousTab

Discussion


Home Electrical Engineering Series Circuits Comments

  • Question
  • There are five resistors in a given series circuit and each resistor has 6 V dropped across it. The source voltage


  • Options
  • A. is 6 V
  • B. depends on the current flow
  • C. depends on the resistor values
  • D. is 30 V

  • Correct Answer
  • is 30 V 


  • Series Circuits problems


    Search Results


    • 1. All the voltage drops and the source voltage added together in a series circuit is equal to

    • Options
    • A. the total of the voltage drops
    • B. the source voltage
    • C. zero
    • D. the total of the source voltage and the voltage drops
    • Discuss
    • 2. Three 680 Ω resistors are connected in series with a 470 V source. Current in the circuit is

    • Options
    • A. 69 mA
    • B. 230 mA
    • C. 23 mA
    • D. 690 mA
    • Discuss
    • 3. A certain series circuit consists of a 1/8 W resistor, a 1/4 W resistor, and a 1/2 W resistor. The total resistance is 1200 Ω. If each resistor is operating in the circuit at its maximum power dissipation, total current flow is

    • Options
    • A. 27 mA
    • B. 2.7 mA
    • C. 19 mA
    • D. 190 mA
    • Discuss
    • 4. A series circuit has a 24 V source and a total resistance of 120 Ω. The current through each resistor is

    • Options
    • A. 24 mA
    • B. 200 mA
    • C. 120 mA
    • D. 20 mA
    • Discuss
    • 5. A 12 V battery is connected across a series combination of 68 Ω, 47 Ω, 220 Ω, and 33 Ω. The amount of current is

    • Options
    • A. 326 mA
    • B. 16.3 mA
    • C. 32.6 mA
    • D. 163 mA
    • Discuss
    • 6. Three 10 kΩ resistors are connected in series. A 20 kΩ resistor is connected in parallel across one of the 10 kΩ resistors. The voltage source is 24 V. The total current in the circuit is

    • Options
    • A. 900 µA
    • B. 9 mA
    • C. 90 mA
    • D. 800 µA
    • Discuss
    • 7. A voltage divider consists of two 100 kΩ resistors and a 12 V source. What will the output voltage be if a load resistor of 1 MΩ is connected to the output?

    • Options
    • A. 0.57 V
    • B. 6 V
    • C. 12 V
    • D. 5.7 V
    • Discuss
    • 8. The parallel combination of a 470 Ω resistor and a 1.2 kΩ resistor is in series with the parallel combination of three 3 kΩ resistors. A 200 V source is connected across the circuit. The resistor with the most current has a value of

    • Options
    • A. 470 Ω or 1.2 kΩ
    • B. 3 kΩ
    • C. 470 Ω
    • D. 1.2 kΩ
    • Discuss
    • 9. A balanced Wheatstone bridge consists of an RV of 3,500 Ω, an R2 of 200 Ω, and an R3 of 680 Ω. The value of RUNK is

    • Options
    • A. 680 Ω
    • B. 1,029 Ω
    • C. 200 Ω
    • D. 880 Ω
    • Discuss
    • 10. Two 1.2 kΩ resistors are in series and this series combination is in parallel with a 3.3 kΩ resistor. The total resistance is

    • Options
    • A. 138 Ω
    • B. 1,389 Ω
    • C. 5,700 Ω
    • D. 880 Ω
    • Discuss


    Comments

    There are no comments.

Enter a new Comment