Discussion
Home ‣ Mechanical Engineering ‣ Hydraulic Machines Comments
- Question
Slip of a reciprocating pump is defined as the
Options- A. ratio of actual discharge to the theoretical discharge
- B. sum of actual discharge and the theoretical discharge
- C. difference of theoretical discharge and the actual discharge
- D. product of theoretical discharge and the actual discharge
- Correct Answer
- difference of theoretical discharge and the actual discharge
- 1. Theoretical power required (in watts) to drive a reciprocating pump is (where w = Specific weight of liquid to be pumped in N/m3, Q = Discharge of the pump in m3/s, Hs = Suction head in metres, and Hd = Delivery head in metres)
Options- A. wQHs
- B. wQHd
- C. wQ(Hs - Hd)
- D. wQ(Hs + Hd) Discuss
- 2. The ratio of quantity of liquid discharged per second from the pump to the quantity of liquid passing per second through the impeller is known as
Options- A. manometric efficiency
- B. mechanical efficiency
- C. overall efficiency
- D. volumetric efficiency Discuss
- 3. Discharge (Q) of a centrifugal pump is given by (where D = Diameter of impeller at inlet, b = Width of impeller at inlet, and Vf = Velocity of flow at inlet)
Options- A. Q = ?.D.Vf
- B. Q = ?.b.Vf
- C. Q = ?.D.b.Vf
- D. Q = D.b.Vf Discuss
- 4. A ship with jet propulsion draws water through inlet orifices at right angles to the direction of its motion. The propelling force of the jet is (where a = Area of the jet, Vr = Relative velocity of the jet and ship = V + v, v = Velocity of the ship, and V = Velocity of the jet issuing from the ship)
Options- A.
- B.
- C.
- D.
Discuss
- 5. A Francis turbine is used when the available head of water is
Options- A. 0 to 25 m
- B. 25 m to 250 m
- C. above 250 m
- D. none of these Discuss
- 6. A Pelton wheel develops 1750 kW under a head of 100 metres while running at 200 r.p.m. and discharging 2500 litres of water per second. The unit power of the wheel is
Options- A. 0.25 kW
- B. 0.75 kW
- C. 1.75 kW
- D. 3.75 kW Discuss
- 7. The speed of a turbine runner is
Options- A. directly proportional to H1/2
- B. inversely proportional to H1/2
- C. directly proportional to H3/2
- D. inversely proportional to H3/2 Discuss
- 8. The maximum efficiency of jet propulsion of a ship with inlet orifices at right angles to the direction of motion of ship, is
Options- A. 40%
- B. 50%
- C. 60%
- D. 80% Discuss
- 9. Discharge of a centrifugal pump is (where N = Speed of the pump impeller)
Options- A. directly proportional to N
- B. inversely proportional to N
- C. directly proportional to N2
- D. inversely proportional to N2 Discuss
- 10. Discharge of a centrifugal pump is
Options- A. directly proportional to diameter of its impeller
- B. inversely proportional to diameter of its impeller
- C. directly proportional to (diameter)2 of its impeller
- D. inversely proportional to (diameter)2 of its impeller Discuss
Hydraulic Machines problems
Search Results
Correct Answer: wQ(Hs + Hd)
Correct Answer: volumetric efficiency
Correct Answer: Q = ?.D.b.Vf
Correct Answer:
Correct Answer: 25 m to 250 m
Correct Answer: 1.75 kW
Correct Answer: directly proportional to H1/2
Correct Answer: 50%
Correct Answer: directly proportional to N
Correct Answer: inversely proportional to (diameter)2 of its impeller
Comments
There are no comments.More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.