Discussion
Home ‣ Certification ‣ CISCO Certification Comments
- Question
What is the full IPv6 address represented by FF02::130F:5?
- Correct Answer
- FF02:0000:0000:0000:0000:0000:130F:0005
- 1. Which of the following uses ATM as the Data Link layer protocol that's terminated at what's known as the DSLAM?
Options- A. DSL
- B. PPPoE
- C. Frame Relay
- D. Dedicated T1 Discuss
- 2. The Acme Corporation is implementing dail-up services to enable remote-office employees to connect to the local network. The company uses multiple routed protocols,needs authentication of users connecting to the network, and since some calls will be long distance, needs callback support. Which of the following protocols is the best choice for these remote services?
Options- A. 802.1
- B. Frame Relay
- C. HDLC
- D. PPP Discuss
- 3. When a router is connected to a Frame Relay WAN link using a serial DTE interface, how is the clock rate determined?
Options- A. Supplied by the CSU/DSU
- B. By the far end router
- C. By the clock rate command
- D. By the Physical layer bits stream timing Discuss
- 4. Suppose you have a customer who has a central HQ and six branch offices. The customer anticipates adding six more branches in the near future. It whishes to implement a WAN technology that will allow the branches to economically connect to HQ and you have no free ports on the HQ router. which of the following would you recommend?
Options- A. PPP
- B. HDLC
- C. Frame Relay
- D. ISDN Discuss
- 5. What does a link-local address always start with? Discuss
- 6. What are the access, distribution, and core components of a North American phone number? Discuss
- 7. Convert FACE1234 16 to dotted decimal. Discuss
- 8. Why are multiple protocols used, such as a package, addressing, delivery, and transportation, instead of using one protocol defining everything? Discuss
- 9. Describe the difference between routing and switching. Discuss
- 10. Explain the difference between a classful and a classless routing protocol. Discuss
CISCO Certification problems
Search Results
Correct Answer: DSL
Explanation:
ATM is the Data-Link layer protocol that's typically used over the DSL layer1 connection from the CPE and terminated at what's known as the DSLAM - an ATM switch that contains DSL interface cards, or ATU-Cs.
Correct Answer: PPP
Explanation:
PPP is your only option because HDLC and Frame RElay do not support these types of business requirements. PPP provides dynamic addressing , authentication using PAP or CHAP, and callback services.
Correct Answer: Supplied by the CSU/DSU
Explanation:
Clocking on a serial interface is always provided by the CSU/DSU (DCE device). However, if you do not have a CSU/DSU in your non-production test environment, then you need to supply clocking with the clock rate command on the serial interface of the router with the DCE cable attached.
Correct Answer: Frame Relay
Explanation:
The key is "there are no free ports" on your router. Only Frame Relay can provide a connection to multiple locations with one interface, and in an economical manner no less.
Correct Answer: FE80::/10
Correct Answer: The last four digits are the used at the access layer to identify a particular telephone The next three numbers are used at the distribution layer to identify an exchange that services several phone numbers The area code is used at the core level for routing between different regions
Correct Answer: Answer: FA 16 = 250 10, CE 16 = 206 10, 12 16 = 18 10, and 34 16 = 52 10 FACE1234 16 = 2502061852 dotted decimal
Correct Answer: Using multiple protocols is modular and allows changes to one protocol without affecting the others For example, if the addressing protocol is dependent on the delivery protocol, changes to one would imply changes need to be made to the other
Correct Answer: Routing moves a letter or telephone call to the access layer (as in a street or telephone exchange) Switching makes the final delivery A switching decision is made on the part of the address that is not used in routing (as in the street number or last four digits of a phone number)
Correct Answer: Classless routing protocols advertise subnet mask information along with the network prefixes Classful routing protocols do not Therefore, for a classful protocol, all subnets for the major network number being used must be the same length Also, classful protocol cannot support discontiguous networks prefixes
Comments
There are no comments.Programming
Copyright ©CuriousTab. All rights reserved.