Discussion
Home ‣ Certification ‣ CISCO Certification Comments
- Question
Pat Address Translation is also called what?
Options- A. NAT Fast
- B. NAT Static
- C. NAT Overload
- D. Overloading Static
- Correct Answer
- NAT Overload
ExplanationAnother term for port Address Translation is NAT Overload because that is the keyword used to enable port address translation.
- 1. Your inside locals are not being translated to the inside global addresses. Which of the following commands will show you if your inside globals are allowed to use the NAT pool? ip nat pool Corp 198.18.41.129 198.18.41.134 netmask 255.255.255.248 ip nat inside source list 100 int pool Corp overload
Options- A. debug ip nat
- B. show access - list
- C. show ip nat translation
- D. show ip nat statistics Discuss
- 2. Which of the following is considered to be the inside hosts address after translation?
Options- A. Inside local
- B. outside local
- C. Inside global
- D. Outside global Discuss
- 3. When creating a pool of global address, which of the following can be used instead of the netmask command?
Options- A. / (slash notation)
- B. prefix - length
- C. no mask
- D. block - size Discuss
- 4. Which command will create a dynamic pool named Todd that will provide you with 30 global addresses?
Options- A. ip nat pool Todd 171.16.10.65 171.16.10.94 net 255.255.255.240
- B. ip nat pool Todd 171.16.10.65 171.16.10.94 net 255.255.255.224
- C. ip nat pool todd 171.16.10.65 171.16.10.94 net 255.255.255.224
- D. ip nat pool Todd 171.16.10.1 171.16.10.254 net 255.255.255.0 Discuss
- 5. Which command will allow you to see real - time translations on your router?
Options- A. show ip nat translations
- B. show ip nat statistics
- C. debug ip nat
- D. clear ip nat translations Discuss
- 6. What type of address translation can use only one address to allow thousands of hosts to be translated globally? Discuss
- 7. In thefollowing output, what type of NAT is being used? ip nat pool todd-nat 170.168.10,10 170.168.10.20 netmask 255.255.255.0 Discuss
- 8. What is the frequency range of the IEEE 802.11g standard?
Options- A. 2.4 Gbps
- B. 5Gbps
- C. 2.4GHz
- D. 5GHz Discuss
- 9. You have finished physically installing an access point on the ceiling of your office. At a minimum, which parameter must be configured on the access point in order to allow a wireless client to operate on it?
Options- A. AES
- B. PSK
- C. SSID
- D. WEp Discuss
- 10. Which encryption type does WPA2 use?
Options- A. AES - CCMP
- B. PPK via IV
- C. PSK
- D. TKIP/MIC Discuss
CISCO Certification problems
Search Results
Correct Answer: show access - list
Explanation:
Once you create your pool, the command ip nat inside source must be used to say which inside locals are allowed to use the pool. In this question we need to see if access - list 100 is configured correctly, if at all , so show access - list is the best answer.
Correct Answer: Inside global
Explanation:
An inside global address is considered to be the IP address of the host on the private network after translation.
Correct Answer: prefix - length
Explanation:
Instead of the netmask command, you can use the prefix-length length statement.
Correct Answer: ip nat pool Todd 171.16.10.65 171.16.10.94 net 255.255.255.224
Explanation:
The command ip nat pool name creates the pool that hosts can use to get onto the global internet. What makes option B correct is that the range 171.16.10.65 through 171.16.10.94 includes 30 hosts, but the mask has to match 30 hosts as well, and that mask is 255.255.255.224 . Option C is wrong because there is a lowercase t in the pool name. Pool name are case sensitive.
Correct Answer: debug ip nat
Explanation:
The command debug ip nat will show you in real time the translations occurring on your router.
Correct Answer: Port Address Translation (PAT), also called NAT Overload
Correct Answer: Dynamic NAT
Correct Answer: 2.4GHz
Explanation:
The IEEE 802.11b and IEEE 802.11g standards both run in the 2.4GHz RF range.
Correct Answer: SSID
Explanation:
The minimum parameter configured on an AP for a simple WLAN installation is the SSID, although you should set the channel and authntication method as well.
Correct Answer: AES - CCMP
Explanation:
WPA2 uses AES-CCMP for encryption. WPA uses TKIP
Comments
There are no comments.Programming
Copyright ©CuriousTab. All rights reserved.