logo

CuriousTab

CuriousTab

Discussion


Home Certification CISCO Certification Comments

  • Question
  • which IOS command enables access to high-level commands?


  • Options
  • A. su root
  • B. admin 0
  • C. enable
  • D. init

  • Correct Answer
  • enable 


  • CISCO Certification problems


    Search Results


    • 1. What port number is used for FTP control?

    • Options
    • A. 20
    • B. 21
    • C. 22
    • D. 25
    • Discuss
    • 2. Given the following network range 192.168.0.0/24. We want minimum 50 hosts on each of the available subnets. What will be the subnet mask?

    • Options
    • A. /24
    • B. /25
    • C. /26
    • D. /27
    • Discuss
    • 3. You are the network administrator and are given the tasks to plan for the future expansion of the network. You decide to subnet the current network of 172.15.0.0. What will be the subnet mask be if every subnet has to allocate 500 hosts.

    • Options
    • A. 255.255.0.0
    • B. 255.0.0.0
    • C. 255.255.240.0
    • D. 255.255.254.0
    • Discuss
    • 4. What is the purpose of the LOCAL_PREF attribute?
    • Discuss
    • 5. Assume a router has a loopback address of 135.77.9.254. Convert the loopback address to an IS-IS system ID.
    • Discuss
    • 6. When data is encapsulated , which is the correct order?

    • Options
    • A. Data, frame, packet, segment, bit
    • B. Segment, data, packet, frame, bit
    • C. Data, segment, packet, frame, bit
    • D. Data, segment, frame, packet, bit
    • Discuss
    • 7. Which layer of the OSI model offers three different modes of communication : Simplex, half duplex, and full duplex?

    • Options
    • A. Presentation
    • B. Transport
    • C. Application
    • D. Session
    • Discuss
    • 8. A receiving host has failed to receive all of the segments that it should acknowledge. What can the host do to improve the reliability of this communication session?

    • Options
    • A. Send a different source port number
    • B. Restart the virtual circuit
    • C. Decrease the sequence number
    • D. Decrease the window size
    • Discuss
    • 9. When a station sends a transmission to the MAC address ff : ff : ff : ff : ff : ff, what type of transmission is it?

    • Options
    • A. Unicast
    • B. Multicast
    • C. Anycast
    • D. Broadcast
    • Discuss
    • 10. If a hub has three computers connected to it, how many broadcast and collision domains is the hub creating?

    • Options
    • A. Three broadcast and one collision
    • B. Three broadcast and three collision
    • C. one broadcast and three collision
    • D. One broadcast and one collision
    • Discuss


    Comments

    There are no comments.

Enter a new Comment