What is called scratch pad of computer?

Correct Answer: RAM: Read / Write memory, High Speed, Volatile Memory ROM: Read only memory, low speed, non volite memory

Correct Answer: ROM cannot be used as stack because it is not possible to write to ROM

Correct Answer: Microprocessor contain ROM chip beacause it contain instructions to execute data It contain the monitor program which not only include execution instruction but also interfacing program

Correct Answer: Intel's 80386 was the first 32-bit processor, and since the company had to backward support the 8086 All the modern Intel-based processors run in the Enhanced mode, capable of switching between Real mode (just like the real 8086) and Protected mode, which is the current mode of operation

Correct Answer: To clear the CMOS password you just remove the CMOS Battery or else you can also use a jumper settings

Correct Answer: Static RAM: no refreshing, 6 to 8 MOS transistors are required to form one memory cell, information stored as voltage level in flip flop Dynamic RAM: refreshed periodically, 3 to 4 transistors are required to form one memory cell, information is stored as a charge in the gate to substrate capacitance

Correct Answer: The data bus is Bi-directional because the same bus is used for transfer of data between Micro Processor and momory of input / output devices in both the direction

Correct Answer: Main Boot Record is located in sector 0, track 0, head 0, cylinder 0 of the primary active partition

Correct Answer: 1 Address lines to refer to the address of a block 2 Data lines for data transfer 3 IC chips 4 Processing data

Correct Answer: In 8086 Carry flag, Parity flag, Ausiliary carry flag, Zero flag, Overflow flag, Trace flag, Interrupt flag, Direction flag, and Sing flag