Home » Aptitude » Height and Distance

If the elevation of the Sun changes from 30° to 60° , then the difference between the lengths of shadows of a pole 15 m high, is

7.5 m
15 m
10√3 m
5√3 m

Correct Answer: 10√3 m

← Previous Question Next Question→

More Questions from Height and Distance

129 meter from the foot of a cliff on level of ground, the angle of elevation of the top of a cliff is 30°. The height of this cliff is
A tower is 50 meters high.Its shadow is x metres shorter when the sun's altitude is 45° than when it is 30° . The value of x in metres is
The length of shadow of a tower is √3 times that of its length. The angle of elevation of the sun is
Two persons are on either side of a temple, 75 m high, observe the angle of elevation of the top of the temple to be 30 and 60 deg respectively. The distance between the persons is
From the top of a 20 m high building, the angle of elevation of the top of a tower is 60° and the angle of depression of it's foot is at 45°, then the height of the tower is (√3=1.732)
The angle of elevation of a ladder leaning against a wall is 60 deg and the foot of the ladder is 4.6 m away from the wall. The length of the ladder is
The upper part of a tree broke at a certain height makes an angle of 60 ° with the ground at a distance of 10 m. from its feet. The original height of the tree was
A boat is moving away from an observation tower. It makes an angle of depression of 60° with an observer's eye when at a distance of 50m from the tower. After 8 sec., the angle of depression becomes 30°. By assuming that it is running in still water, the approximate speed of the boat is
The angle of elevation of an aeroplane from a point on the ground is 45°. After flying for 15 seconds, the elevation changes to 30°. If the aeroplane is flying at a height of 2500 metres, then the speed of the aeroplane in km/hr. is
The shadow of a tower when the angle of elevation of the sun is 45°, is found to be 10 m longer than when it was 60° . The height of the tower is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion