Upper part will go down in opposite direction in water image.
From first figure to second figure an inverted figure is also added.
All other figures have small mouth.But figure ( 2 ) has different to others .
On the basis of given figure in above question, we can say that
The square rotates through 45° clockwise while the white and the black dots move in anticlockwise direction (i.e., from left to right).
Hence , option C will come on the place of ? .
For least number of cuts 120 = 4 x 5 x 6 i.e number of cuts must be 3, 4 and 5 in three planes in this case number of cubes on a face is either 6 x 5 = 30 or 6 x 4 = 24 or 4 x 5 = 20 cubes . And number of cuboids on an edge is 4 or 5 or 6
Maximum number of cuboid with red colour is possible when cube is painted with red colour in 3 sides with minimum number of common edges (which is equal to 2)
Hence required maximum value is 6 (5 + 5 + 4 - 2) = 72
For minimum number of such cuboid Red colour is used only once and minimum number of cubes in that case is 20
Hence required ratio is 72 : 20 = 18 : 5
NA
Here on each face 6 x 6 = 36 cubes that are painted with one colour.
Case (i): when these three colour are adjacent to each other then from one face we will get 6 x 6 = 36 cubes but out them 6 x 3 = 18 cubes from common edge is common so number of cubes are 3 x 6 x 6 - 6 x 3 = 90
Case (ii): When red and blue are opposite to each other (or any two of the given three) then required number of cubes is 3 x 6 x 6 - 2 x 6 = 96
Except in figure (1) in all others the number of pins is one less than the number of sides of the geometrical figure.
The design (+) is encircled by two different designs in figure (2). But all three figures are in same .
Comments
There are no comments.Copyright ©CuriousTab. All rights reserved.