Curioustab

Home » Chemical Engineering » Process Control and Instrumentation

Dilatometer is used to measure

stress
strain
deflection
contraction/expansion due to changes in temperature

Correct Answer: contraction/expansion due to changes in temperature

← Previous Question Next Question→

More Questions from Process Control and Instrumentation

The transfer function of a first order system is
Optical activity of a solution can be determined using a
Water is entering a storage tank at a temperature T0 and flow rate Q0 and leaving at a flow rate Q and temperature T. There are negligible heat losses in the tank. The area of cross-section of the tank is A0. The model that describes the dynamic variation of temperature of water in the tank with time is given as :
__________ stability method uses open loop transfer function.
Thermal conductivity based continuous flue gas analyser makes use of varying thermal conductivity of the constituents of flue gases. Which of the following constituents of flue gases has the maximum thermal conductivity?
The transfer function of a second order system is
Emf generated in a thermocouple depends on the temperature
A first order system with a time constant of 1 min is subjected to frequency response analysis. At an input frequency of 1 radian/min, the phase shift is
A system with a double pole at the origin is unstable since the corresponding term in the time domain
A photo electric device in which the resistance of the metal is directly proportional to the light striking on it, is known as photo-conductive cell. Photoelectric transducers are used for the measurement of those parameters, which can be used to produce variation in

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion