This statement will set the address of the bit to 1 (8051 Micro-controller): SETB 01H

More Questions from The 8051 Microcontroller

• This program code will read data from port 0 and write it to port 2, and it will stop looping when bit 3 of port 2 is set: STAT: MOV A, PO MOV P2,A JNB P2.3, STAT
• The 8051 can handle ________ interrupt sources.
• The 8-bit address bus allows access to an address range of:
• Which of the following commands will copy the contents of location 4H to the accumulator?
• The following command will rotate the 8 bits of the accumulator one position to the left: RL A
• An alternate function of port pin P3.0 (RXD) in the 8051 is:
• The following command will copy the accumulator to the location whose address is 23H: MOV 23H,A
• When the 8051 is reset and the EA line is LOW, the program counter points to the first program instruction in the:
• Which of the following statements will add the accumulator and register 3?
• Which of the following instructions will move the contents of the accumulator to register 6?

Discussion & Comments