Curioustab

Home » Digital Electronics » Combinational Logic Circuits

The K-map in the figure below shows the correct implementation of the expression X = ACD + AB(CD + BC).

True

Correct Answer: False

← Previous Question Next Question→

More Questions from Combinational Logic Circuits

A combinatorial logic circuit has memory characteristics that "remember" the inputs after they have been removed.
To implement the full-adder sum functions, two exclusive-OR gates can be used.
The carry output of each adder in a ripple adder provides an additional sum output bit.
Single looping in groups of three is a common K-map simplification technique.
The input at the 1, 2, 4, 8 inputs to a 4-line to 16-line decoder with active-low outputs is 1110. As a result, output line 7 is driven LOW.
The XOR gate will produce a HIGH output if only one but not both of the inputs is HIGH.
The Boolean equation results from this Karnaugh map.
TTL stands for transistor-technology-logic.
In an even-parity system, the following data will produce a parity bit = 1. data = 1010011
A pull-up resistor is a resistor used to keep a given point in a circuit HIGH when in the active state.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion