Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

Which of the following efficiencies can be greater than 100%?

Overall plate efficiency.
Murphree plate efficiency.
Point efficiency.
None of these.

Correct Answer: Murphree plate efficiency.

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

Elastic failure of a material occurs, when the tensile stress equals yield strength, yield point or the elastic limit. Also, the elastic failure occurs according to maximum strain theory, when the maximum tensile strain equals (where, σ = yield strength and E = modulus of elasticity)
Pick out the wrong statement.
for a Tee (used as elbow, entering run) would be around
A minimum clearance of about __________ mm is maintained between the distillation column wall and the bubble cap.
The distance between the centre of a rivet hole to the nearest edge of the plate is called
Vertical storage vessels are never supported by __________ support.
Power required for agitation depends upon the
Wind load consideration in the design of a support can be neglected, when the vessel is
Log mean temperature difference in case of multi-pass shell and tube heat exchanger is always
Practical dividing line between a ductile and brittle materials is suggested, when the ultimate elongation is about 5%. Generally, larger the knuckle radius, stronger is the corner torus section of a head. The knuckle radius provided should be less than __________ of the head.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion