Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

Slope of countercurrent flow rotary drier is in the range of __________ meter/metre.

0 to 0.08
0 to 0.8
0 to 1.5
0 to 2.2

Correct Answer: 0 to 0.08

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

__________ tower is the most suitable gas-liquid contacting device involving highly corrosive fluids.
In case of plain carbon steel, butt welded joints are used for shell plate thickness ≤ __________ cms.
Minimum tube pitch recommended for shell and tube heat exchangers is about __________ times the outside diameter of the tube.
In distillation columns, bubble caps are held in place over trays by
The normal range of velocity of water in pipes is __________ m/sec.
for couplings and unions would be
Baffles are provided in a shell and tube heat exchanger to increase the turbulence and velocity of the shell side fluid. Which of the following shaped baffles does not fall in the category of transverse baffle?
The longitudinal stress induced in a thin walled cylinderical vessel under internal pressure is
In case of saddle packing (e.g., berl and intralox saddles), the maximum size of the packing should not exceed __________ of the column diameter.
When one of the fluids is highly corrosive and has fouling tendency, it should

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion