Curioustab

Home » Chemical Engineering » Process Control and Instrumentation

Magnetic flowmeters are generally not used for the velocity/flow measurement of hydrocarbons due to their

low thermal conductivity.
low electrical conductivity.
high viscosity index.
low flash point.

Correct Answer: low electrical conductivity.

← Previous Question Next Question→

More Questions from Process Control and Instrumentation

The calibration data of a thermocouple with its cold junction at 0°C are given below. The hot junction of the thermocouple is placed in a bath at 80°C, while its cold junction is at 20°C. What is the emf of thermocouple?
Turbine flow meters are suitable for
Which of the systems having the following transfer function is stable?
Use of I-control along with P-control facilitates
The transfer function for a first order process with time delay is
Liquid discharge from a tank or reservoir can not be measured by
The frequency response of a dynamic element shows a constant magnitude ratio at all frequencies. The element exhibits a negative phase shift at all frequencies. The absolute value of the phase shift increases linearly with frequency. The element has the transfer function
A mercury barometer measures the __________ pressure.
__________ are analysed using a polarograph.
Measurement of sub-zero Celcius temperature in industry is done most commonly by

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion