Curioustab

Home » Chemical Engineering » Furnace Technology

Rotary kilns are used in the

calcination of limestone & dolomite.
cement manufacture.
both (a) and (b).
neither (a) nor (6).

Correct Answer: both (a) and (b).

← Previous Question Next Question→

More Questions from Furnace Technology

Metallic recuperators are not used for waste heat recovery, if the hot flue gas temperature is above __________ °C, because corrosion prevails at higher temperatures.
Very high pressure boilers are usually __________ boilers.
Which of the following is not a continuous waste heat recovery equipment from the flue gases going out of furnace?
Heat transfer rate to the charge/stock in a furnace does not depend upon the
In low or standard frequency induction furnace, heat is produced by the
Ingress of cold air in the furnaces through cracks, charging doors, openings etc.
Specific heating capacity of a furnace is expressed as
Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an
Shaft furnaces are used for
Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case of complete combustion of

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion