Curioustab

Home » Chemical Engineering » Furnace Technology

The heating capacity of continuous reheating furnace depends upon the

hearth area and furnace temperature.
emissivity of the stock.
ratio of wall surface to stock surface.
all (a), (b) and (c).

Correct Answer: all (a), (b) and (c).

← Previous Question Next Question→

More Questions from Furnace Technology

If fuel and air are mixed ahead of the burner, it is called a/an __________ burner.
Combustion of furnace oil in a furnace (soaking pit) with preheated combustion air at 400°C results in saving of about __________ percent furnace oil as compared to its combustion with atmospheric air, if the flue gas outlet temperature from the soaking pit is 1200°C.
The resistance furnace produces heat by the
If the flame is produced under the hearth and then sweeps up into the heating chamber, this is called a/an __________ furnace.
Operation of blast furnace stove is based on the principles of a __________ furnace.
A refractory wall separating the stock and the source of heat is provided in a
Amount of coal lost in ash particle, which is carried through the boiler system, depends upon the
Which one is not an induced draught furnace?
Combustion of fuel in a furnace with oxygen enriched air results in higher
Furnace aerodynamics is related to the __________ in the furnace.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion