Curioustab

Home » Chemical Engineering » Process Control and Instrumentation

A bolometer is

used for the measurement of thermal radiation.
an element which senses optical input and delivers thermal output.
both (a) & (b).
neither (a) nor (b).

Correct Answer: both (a) & (b).

← Previous Question Next Question→

More Questions from Process Control and Instrumentation

Bode diagram are generated from output response of the system subjected to which of the following input?
The transfer function of a process is . If a step change is introduced into the system, then the response will be
Stability of a control system containing a transportation lag can be best analysed by
When a bare thermocouple is covered by a protective sheath, the response becomes
Vapour actuated pressure spring thermometer does not require ambient temperature compensation. Ambient temperature compensation is provided in gas or liquid expansion pressure spring thermometer by
Temperature measurement by optical pyrometer is done above __________ point, which is 1063°C.
Stabilising time for the controllers is the time required for the response to reach __________ percent of its ultimate value.
Working principle of mercury in glass thermometer is based on the __________ of mercury with increase in temperature.
The open loop transfer function of a process is . In the root locus diagram, the poles will be at
Composition of alloys can be determined by

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion