Curioustab

Home » Biochemical Engineering » Fermentation Reactors

In plug flow tubular reactor the axial velocity profile on cross-section will be

constant
varying with time
non-linear
power function of time

Correct Answer: constant

← Previous Question Next Question→

More Questions from Fermentation Reactors

The ideal tubular-flow fermenter without radial variations is called a
When Escherichia coli grow in a well aerated medium, which of the following will occur?
Pseudomonas aeruginosa has a maximum specific growth rate of 0.8 h-1 in a medium with glucose as a growth limiting substrate. To prevent wash out, the dilution rate must be set to
Which of the following organisms will continue their metabolism at high substrate concentrations?
In the batch-fed mode, substrate will be added
Pseudo-steady state in a continuous reactor refers to a reactor in which
In a plug flow reactor, the highest concentration of substrates is exposed to the cells that
In fed batch bioreactor modelling, the rate of change in the bioreactor volume is assumed to be equal to
Which of the following is not correct with regards to continuous cultures?
Two continuous bioreactors containing the same organisms, fed with the same feed at the same dilution rate were compared. Reactor 1 started with an initial concentration of glucose of 10 g.l-1, while reactor 2 contained 0.1 g.l-1 of glucose at the start of the process then at steady state

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion