Curioustab

Home » Chemical Engineering » Process Control and Instrumentation

A bimetallic thermometer as compared to industrial mercury in glass thermometer has almost the same

temperature measuring range (- 40°C to 450°C).
accuracy (± 1% of span).
speed of response.
all a, b & c.

Correct Answer: all a, b & c.

← Previous Question Next Question→

More Questions from Process Control and Instrumentation

Suppose that the gain, time constant and dead time of a process with the following transfer function:Gc(s) = 10 exp( - 0.1s)/(0.5s + 1) are known with a possible error of ± 20% of their values. The largest permissible gain Kc of a proportional controller needs to be calculated below taking the values of process gain, time constant and dead time as
For a feed back control system to be stable, the
__________ controller has the maximum stabilising time.
__________ type of element is normally not used in the bimetallic thermometers.
Flow rate of sludge is not measured by a/an
Which of the following is not a second order instrument?
Thermal wells used in temperature measurements should have
In a shell and tube heat exchanger, the inlet temperature of heating/cooling fluid is the __________ variable.
Out of the following themocouple wire insulating material, the highest temperature rating is for
Which of following error integral is considered as the best criterion in controller settings?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion