Standards & Conventions — The American Society of Mechanical Engineers (ASME) publishes standards that include guidance for auxiliary views as part of orthographic and section-view practice.

Introduction / Context:
Technical drawings follow formal conventions to ensure consistent interpretation. ASME publishes widely adopted standards for views, dimensions, and practices, and auxiliary views are recognized within these frameworks for revealing true shapes of inclined features.

Given Data / Assumptions:

• Industry relies on standards for interoperability and quality.
• Auxiliary views are part of orthographic projection practice.
• Standards cover view creation, labeling, and clarity requirements.

Concept / Approach:
Standards ensure that a supplier and a client interpret a drawing identically. Including auxiliary views within standards codifies how and when to use them, reducing ambiguity in manufacturing and inspection.

Step-by-Step Solution:
1) Identify inclined features not shown in true size in principal views.2) Add auxiliary views per standardized projection and labeling conventions.3) Dimension on the view that best shows true shape, following tolerancing rules.4) Cross-reference notes and sections as required by standards.

Verification / Alternative check:
Compliance checks and drawing audits reference standard clauses, confirming auxiliary views are covered and expected where appropriate.

Why Other Options Are Wrong:
Coverage is not limited to architecture or manual drafting; asserting “no standards” contradicts industry practice.

Common Pitfalls:
Ignoring view precedence, failing to place dimensions on the most informative view, or omitting necessary annotations.

Final Answer:
Correct