logo

CuriousTab

CuriousTab

Networks Analysis and Synthesis problems


  • 1. C = (2) (energy)/V2

  • Options
  • A. True
  • B. False
  • Discuss
  • 2. Z(c) for the network shown in the figure is Electronics and Communication Engineering Networks Analysis and Synthesis: Z(c) for the network shown in the figure is The value of C and R are, respectively
    Electronics and Communication Engineering Networks Analysis and Synthesis: Z(c) for the network shown in the figure is

  • Options
  • A. 1/6 F and 4 ?
  • B. 2/9 F and 9/2 ?
  • C. 2/3 F and 1/2 ?
  • D. 1/2 F and 1 ?
  • Discuss
  • 3. A capacitor stores 0.15C at 5 V. Its capacitance is

  • Options
  • A. 0.75 F
  • B. 0.75 ?F
  • C. 0.03 F
  • D. 0.03 ?F
  • Discuss
  • 4. The impedance of an RC series circuit is 12 ? at f= 50 Hz. At f= 200 Hz, the impedance will be

  • Options
  • A. more than 12
  • B. less than 3
  • C. more than 3 ? but less than 12 ?
  • D. more than 12 ? but less than 24 ?
  • Discuss
  • 5. In the series circuit shown in figure, for series resonance, the value of the coupling coefficient, K will be
    Electronics and Communication Engineering Networks Analysis and Synthesis: In the series circuit shown in figure, for series resonance, the value of the coupling coefficient,

  • Options
  • A. 0.25
  • B. 0.5
  • C. 0.1
  • D. 1
  • Discuss
  • 6. As compared to the number of network elements in Brune synthesis, the number of network elements Bott-and Duffin in realization is

  • Options
  • A. more
  • B. less
  • C. equal
  • D. any of the above
  • Discuss
  • 7. Two networks are cascaded through an ideal buffer. If td1 and td2 are delay times of network, the overall delay time is

  • Options
  • A. td1 + td2
  • B. t2d1 + t2d2
  • C. td1 + td2
  • D.
  • Discuss
  • 8. A capacitor is needed for an ac circuit of 230 V, 50 Hz the peak voltage rating of the capacitor should be

  • Options
  • A. 230 V
  • B. 0.5 x 230 V
  • C. 2 x 230V
  • D. 230/2V
  • Discuss
  • 9. For node 1 in figure, KCL equation is
    Electronics and Communication Engineering Networks Analysis and Synthesis: For node 1 in figure, KCL equation is

  • Options
  • A.
  • B.
  • C.
  • D. none of the above
  • Discuss
  • 10. Which of the following is correct for a driving point functions?

  • Options
  • A. The real parts of all poles must be negative
  • B. The real parts of all poles and zeros must be negative
  • C. The real parts of all poles and zeros must be negative or zero
  • D. The real parts of all zeros must be negative
  • Discuss

First 2 3 4