Windows 2000 Server problems
- 1. You are the network administrator for your company. The company has numerous branch offices, and each office uses Internet Connecting Sharing to connect to the Internet. A new employee named David Johnson is configuring a Windows 2000 Server computer as a file server. When David uses Windows update for the first time and select Product Update, he receives an error message stating that access is denied. David needs to be able to update the file by using his account. What should you do?
Options- A. Configure the settings for Internet Connecting Sharing to allow POP3 access
- B. Configure the settings for Internet Connecting Sharing to allow SMTP access
- C. Give David's user account administrator privileges on the Windows 2000 Server computer
- D. Instruct David to log on as a domain administrator on the Windows 2000 Server computer
- E. None of above Discuss
Correct Answer: Give David's user account administrator privileges on the Windows 2000 Server computer
- 2. Your Windows 2000 Server computer contains a stripe set with parity on a four-disk array. You convert the stripe set with parity to a dynamic RAID-5 volume. Six months later, users report that disk access on the server is slower than it had been on the previous day, You use Disk Management and discover that the status of the third disk in the array is Missing. You want to recover the failed RAID-5 volume. What should you do first?
Options- A. Replace the third disk and restart the server. Use disk Management to repair the volume
- B. Ensure that the third disk is attached to the server and has power. Use Disk Management to reactivate the disk
- C. Ensure that the third disk is attached to the server and has power. Use Disk Management to repair the volume
- D. Install a new disk and create a single extended partition on the new disk. Restart the computer and allow Windows 2000 to automatically repair the volume on the extended partition
- E. None of above Discuss
Correct Answer: Ensure that the third disk is attached to the server and has power. Use Disk Management to reactivate the disk
- 3. You install your boot volume on volume C on your Windows 2000 Server computer. You mirror volume C on dynamic Disk 1. Two years later, during routine server maintenance, you open Disk Management and find that the status of volume C is Failed Redundancy. The status of Disk 1 is Missing. You attempt to reactivate Disk 1, but the status of volume C does not return to Healthy. What should you do next?
Options- A. Replace Disk 1 and restart the computer. The mirror will automatically regenerate
- B. Remove the mirror on Disk 1, replace the disk, and then add back the mirror to the new Disk 1
- C. Replace Disk 1 and copy all data from volume C to a new NTFS primary partition on the new Disk 1. Restart the computer
- D. Rescan the disks, remove the mirror, and delete the data on Disk 1. Then re-create the mirror
- E. None of above Discuss
Correct Answer: Remove the mirror on Disk 1, replace the disk, and then add back the mirror to the new Disk 1
- 4. A Windows 2000 Server computer named server2 runs numerous 32bit applications and two 16bit applications. Users start the 16bit applications by running APP1.EXE for one application and APP2.EXE for another application. The 16bit applications are configured to run in the separate memory space. You want to create a performance base like chart in the system monitor for all the applications on server2. You add all of 32bit applications and now you want to add two 16bit applications. What should you do?
Options- A. Add the APP1 and APP2 instances to the processor time counter for the process object
- B. Add the NTVDM, APP1 and APP2 instances for the processor time counter for the process object
- C. Add only the NTVDM instance for the percent processor time counter for the process object
- D. Add the NTVDM 1 and NTVDM #2 instances for processor time counter for the process object
- E. None of above Discuss
Correct Answer: Add the NTVDM 1 and NTVDM #2 instances for processor time counter for the process object
- 5. You are the administrator of Windows 2000 Server network. On each server you format a separate system partition and a separate boot partition as NTFS. Several months later you shut down one of the computers for maintenance. When you try to restart the computer you receive the following error message "NTLDR is missing, press any key to restart". You want to install a new NTLDR file on the computer but you do not want to loose any settings you made since the installation. What should you do?
Options- A. Start the computer by using Windows 2000 Server computer CD-ROM and choose tools to repair the installation. Select recovery console and copy the NTLDR file on the CD-ROM to the root of the system volume
- B. Start the computer by using the Windows 2000 server CD- ROM, choose to reinstall. When the installation is complete copy the NTLDR to the root of the boot volume
- C. Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt run the sfc/scanboot command
- D. Start the computer by using Windows 2000 bootable floppy disk. Run the file signature verification utility
- E. None of above Discuss
Correct Answer: Start the computer by using Windows 2000 Server computer CD-ROM and choose tools to repair the installation. Select recovery console and copy the NTLDR file on the CD-ROM to the root of the system volume
- 6. You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers. You want to install Windows 2000 Server on a new computer. You want the new computer to act as a domain controller in the existing domain. What should you do?
Options- A. On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server
- B. On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use Active Directory Sites and Services to force synchronization of the domain controllers
- C. Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory Installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows2000 domain as the existing Windows NT domain
- D. Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory Installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart the Windows NT PDC on the network and demote it to a BDC
- E. None of above Discuss
Correct Answer: On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server
- 7. You are the administrator of a Windows 2000 Server computer that has FIVE hard disks. Four 100 GB hard disks on the server are configured as a single stripe volume. You want to reconfigure the fourth disk so that the volume is fault tolerant and has as much space possible available for storing data. You want to use only existing hardware. What should you do?
Options- A. Convert the disk to dynamic disk shut down and restart the server
- B. Backup the data on the stripe volume and delete the stripe volume. Create a raid5 volume on the four disks, restore the data to the new raidS volume
- C. Backup the data on the stripe volume and delete the stripe volume. Create to mirror volume, shut down and restart the server. Restore the data to new mirror volumes
- D. Backup the data on the stripe volume and delete the stripe volume. Create a span volume for the first two disks, create a second span volume for the last two disk. Mount the root of the second span volume in the root of the first span volume. Restore the data to the first span volume
- E. None of above Discuss
Correct Answer: Backup the data on the stripe volume and delete the stripe volume. Create a raid5 volume on the four disks, restore the data to the new raidS volume
- 8. You are installing Windows 2000 Server on a multiprocessor computer. The manufacturer has provided a customized HAL to use with the computer. The HAL is on the floppy disk. You want to install the customized HAL design for the computer. What should you do?
Options- A. During the text mode portion of the Windows 2000 setup install the customized HAL
- B. After text mode portion of Windows 2000 setup is complete use the recovery console to copy the customized HAL to the system32 folder on the boot partition
- C. After the text mode portion your windows 2000 setup is complete use the emergency repair process to replace the existing HAL with the customized HAL and then continue the windows 2000 setup
- D. After the Windows 2000 setup is complete use the device manager to scan for Hardware changes when prompted install the customized HAL
- E. None of above Discuss
Correct Answer: During the text mode portion of the Windows 2000 setup install the customized HAL
- 9. How can you assign an application to one processor exclusively?
Options- A. Right click on application executable, select properties and select assign processor
- B. Right click on application process in Task Manager, select Set Affinity, and select the appropriate processor
- C. Open Task Manager, chose options from task bar, select processor and assign processes to appropriate processor
- D. Open Task Manager, chose Performance, chose view all processors, assign processes to appropriate processor
- E. None of above. Discuss
Correct Answer: Right click on application process in Task Manager, select Set Affinity, and select the appropriate processor
- 10. You are the administrator of the Windows 2000 Server network shown in the exhibit. Users in the Research group and the Executive group have permission to access the Internet through a Windows 2000 Server computer running Microsoft Proxy Server. These users must enter their proxy server user names and passwords to connect to the proxy server, to the Internet, and to your local intranet server. The users who do not access the Internet do not have user accounts on the proxy server and, therefore, cannot connect to the intranet server. You want all users to be able to connect to the intranet server without entering a separate user name and password. What should you do?
Options- A. Move the intranet server to the client segment of the network
- B. Move the proxy server to the server segment of the network
- C. Configure each client computer to bypass the proxy server for local addresses
- D. Configure each client computer to use port 81 for the proxy server
- E. None of above Discuss
Correct Answer: Configure each client computer to bypass the proxy server for local addresses
More in Computer Science:
Programming
Copyright ©CuriousTab. All rights reserved.