logo

CuriousTab

CuriousTab

Networking problems


  • 1. An error-detecting code inserted as a field in a block of data to be transmitted is known as

  • Options
  • A. Frame check sequence
  • B. Error detecting code
  • C. Checksum
  • D. flow control
  • Discuss
  • 2. An ROP would be attached to a

  • Options
  • A. simplex channel
  • B. duplex channel
  • C. half duplex channel
  • D. full duplex channel
  • E. None of the above
  • Discuss
  • 3. X.21 is

  • Options
  • A. a method of determining which device has access to the transmission medium at any time
  • B. a method access control technique for multiple-access transmission media
  • C. a very common bit-oriented data link protocol issued by ISO
  • D. network access standard for connecting stations to a circuit-switched network
  • E. None of the above
  • Discuss
  • 4. Working of the WAN generally involves

  • Options
  • A. telephone lines
  • B. microwaves
  • C. satellites
  • D. All of the above
  • E. None of the above
  • Discuss
  • 5. Which of the following statement is incorrect?

  • Options
  • A. The transport layer provides for any format, translationer code conversion necessary to put the data into an intelligible format.
  • B. The presentation layer transforms information from machine format to the understandable format.
  • C. The data link layer handles the transfer of data between the ends of a physical link.
  • D. All of the above
  • E. None of the above
  • Discuss
  • 6. You have purchased a MAU (Multistation Access Unit) from your computer supplier and now must decide what type of network card you should install in the workstations. Which of the following would be the most appropriate?

  • Options
  • A. Fast SCSI Wide
  • B. Token-Ring
  • C. ArcServe
  • D. Ethernet
  • E. None of the above
  • Discuss
  • 7. The systematic access of small computers in a distributed data processing system is referred to as:

  • Options
  • A. dialed service
  • B. multiplexing
  • C. polling
  • D. conversational mode
  • E. None of the above
  • Discuss
  • 8. How many OSI layers are covered in the X.25 standard?

  • Options
  • A. two
  • B. three
  • C. seven
  • D. six
  • E. None of the above
  • Discuss
  • 9. A 6-MHz channel is used by a digital signaling system utilizing 4-level signals. What is the maximum possible transmission rate?

  • Options
  • A. 1.5 Mbaud/sec
  • B. 6 Mband/sec
  • C. 12 Mbaud/sec
  • D. 24 Mbaud/sec
  • E. None of the above
  • Discuss
  • 10. What is the minimum number of wires required for sending data over a serial communications links?

  • Options
  • A. 2
  • B. 1
  • C. 4
  • D. 3
  • E. None of the above
  • Also asked in: Bank Exams, CAT, Bank Clerk

  • Discuss

First 34 35 36 ... 38 .. 41 42 Last