logo

CuriousTab

CuriousTab

Surveying problems


  • 1. Pick up the correct statement from the following :

  • Options
  • A. A level surface is perpendicular at all points to the direction of gravity
  • B. A level line lies in level surface
  • C. A horizontal surface is normal to the direction of gravity at only one point
  • D. A horizontal line is tangential to the level surface
  • E. All the above.
  • Discuss
  • 2. Volume of the earth work may be calculated by

  • Options
  • A. mean areas
  • B. end areas
  • C. Prismoidal formula
  • D. Trapezoidal
  • E. all the above.
  • Discuss
  • 3. In an internal focusing telescope

  • Options
  • A. the objective is at a fixed distance from the diaphragm
  • B. the focusing is done by the sliding of a divergent lens.
  • C. the focusing divergent lens is situated at about the middle of the tube
  • D. all the above.
  • Discuss
  • 4. The 'fix' of a plane table from three known points, is good, if

  • Options
  • A. middle station is nearest
  • B. middle station is farthest
  • C. either the right or left station is nearest
  • D. none of these.
  • Discuss
  • 5. Ramsden eye-piece consists of

  • Options
  • A. two convex lenses short distance apart
  • B. two concave lenses short distance apart
  • C. one convex lens and one concave lens short distance apart
  • D. two plano-convex lenses short distance apart, with the convex surfaces facing each other.
  • Discuss
  • 6. Removal of parallax, may be achieved by focussing

  • Options
  • A. the objective
  • B. the eye-piece
  • C. the objective and the eye-piece
  • D. none of these.
  • Discuss
  • 7. The slope correction may be ignored if

  • Options
  • A. the slope of the ground is less than 3°
  • B. to slope of the ground is say 1 in 19
  • C. both (a) and (b)
  • D. neither (a) nor (b)
  • Discuss
  • 8. The main plate of a transit is divided into 1080 equal divisions. 60 divisions of the vernier coincide exactly with 59 divisions of the main plate. The transit can read angles accurate upto

  • Options
  • A. 5"
  • B. 10"
  • C. 15"
  • D. 20"
  • E. 30"
  • Discuss
  • 9. The whole circle bearing of a line is 290°. Its reduced bearing is

  • Options
  • A. N 20° E
  • B. N 20° W
  • C. N 70° W
  • D. S 70° E
  • Discuss
  • 10. Cross-staff is used for

  • Options
  • A. setting out right angles
  • B. measuring contour gradient
  • C. taking levels
  • D. measuring distances
  • E. none of these
  • Discuss

First 14 15 16 ... 25 .. 34 35 Last