Steel Structure Design problems
- 1. The safe working pressure for a spherical vessel 1.5 m diameter and having 1.5 cm thick wall not to exceed tensile stress 50kg/cm2 , is
Options- A. 16 kg/cm2
- B. 18 kg/cm2
- C. 20 kg/cm2
- D. 22 kg/cm2 Discuss
Correct Answer: 20 kg/cm2
- 2. A riveted joint many experience
Options- A. tearing failure of plates
- B. bearing failure of plates
- C. splitting failure of plates at the edges
- D. bearing failure of rivets
- E. all the above. Discuss
Correct Answer: all the above.
- 3. In a built up beam actual bending compressive stress fbc is given by (when y1 is the distance of the edge of the beam from the neutral axis).
Options- A.
- B.
- C.
- D.
- E.
Discuss
Correct Answer:
- 4. When a tension member consists of two channel sections, the allowance for rivet hole is made for two holes from
Options- A. each web
- B. each flange
- C. both webs
- D. each web or one hole from each flange whichever is more
- E. each web or one hole from each flange whichever is less. Discuss
Correct Answer: each web or one hole from each flange whichever is less.
- 5. The distance between the outer faces of flanges of a plate girder, is known as
Options- A. overall depth
- B. clear depth
- C. effective depth
- D. none of these. Discuss
Correct Answer: overall depth
- 6. Tacking rivets in compression plates not exposed to the weather, have a pitch not exceeding 300 mm or
Options- A. 16 times the thickness of outside plate
- B. 24 times the thickness of outside plate
- C. 32 times the thickness of outside plate
- D. 36 times the thickness of outside plate. Discuss
Correct Answer: 32 times the thickness of outside plate
- 7. Rolled steel angle sections are classified as
Options- A. equal angles
- B. unequal angles
- C. bulb angles
- D. all the above. Discuss
Correct Answer: all the above.
- 8. An imaginary line along which rivets are placed, is known as
Options- A. rivet line
- B. scrieve line
- C. back line
- D. gauge line
- E. all the above. Discuss
Correct Answer: all the above.
- 9. The connection of one beam to another beam by means of an angle at the bottom and an angle at the top, is known as
Options- A. unstiffened seated connection
- B. stiffened seated connection
- C. seated connection
- D. none of these. Discuss
Correct Answer: seated connection
- 10. Lug angle is
Options- A. used with single angle member
- B. not used with double angle member
- C. used with channel member
- D. all the above. Discuss
Correct Answer: all the above.
More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.