logo

CuriousTab

CuriousTab

RCC Structures Design problems


  • 1. If the maximum dip of a parabolic tendon carrying tension P is h and the effective length of the prestressed beam is L, the upward uniform pressure will be

  • Options
  • A.
  • B.
  • C.
  • D.
  • E.
  • Discuss
  • 2. If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is

  • Options
  • A. D = 0.0775 a
  • B. D = 0.775 a
  • C. D = 0.775a
  • D. D = 0.775 a2
  • Discuss
  • 3. The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes

  • Options
  • A. with the horizontal
  • B. with the vertical
  • C. with the perpendicular to. the inclined plane of the soil
  • D. none of these.
  • Discuss
  • 4. The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is

  • Options
  • A. 20 cm
  • B. 25 cm
  • C. 30 cm
  • D. 35 cm
  • E. 40 cm
  • Discuss
  • 5. If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is

  • Options
  • A. 12 mm
  • B. 13 mm
  • C. 14 mm
  • D. 15 mm
  • E. 16 mm
  • Discuss
  • 6. The breadth of a ribbed slab containing two bars must be between

  • Options
  • A. 6 cm to 7.5 cm
  • B. 8 cm to 10 cm
  • C. 10 cm to 12 cm
  • D. 12 cm to 15 cm
  • E. none of these.
  • Discuss
  • 7. If l1 and l2 are the lengths of long and short spans of a two way slab simply supported on four edges and carrying a load w per unit area, the ratio of the loads split into w1 and w2 acting on strips parallel to l2 and l1 is

  • Options
  • A.
  • B.
  • C.
  • D.
  • Discuss
  • 8. If the modular ratio is m, steel ratio is r and overall depth of a beam is d, the depth of the critical neutral axis of the beam, is

  • Options
  • A.
  • B.
  • C.
  • D.
  • E.
  • Discuss
  • 9. A per IS : 1343, total shrinkage for a pretensioned beam, is

  • Options
  • A. 3.0 x 10-2
  • B. 3.0 x 10-3
  • C. 3.0 x 10-4
  • D. 3.0 x 10-5
  • E. 3.5 x 10-5
  • Discuss
  • 10. The Young's modulus of elasticity of steel, is

  • Options
  • A. 150 KN/mm2
  • B. 200 KN/mm2
  • C. 250 KN/mm2
  • D. 275 KN/mm2
  • Discuss

First 23 24 Last