Airport Engineering problems
- 1. The fuse large includes
Options- A. passengers chamber
- B. pilot's cabin
- C. tail of aircraft
- D. all the above. Discuss
Correct Answer: all the above.
- 2. Pick up the correct statement from the following:
Options- A. F.I.R. stands for flight information regions
- B. F.I.C. stands for flight information centre
- C. Radius of control area is 160 km
- D. Radius of control zone is 40 km
- E. All the above. Discuss
Correct Answer: All the above.
- 3. The distance between main gears is 10 m, and the distance of nose gear from centre of main gears is 30 m. If the angle of turning is 60°, the distance of centre of rotation from the nearer main gear, is
Options- A. 12.30 m
- B. 11.30 m
- C. 10.30 m
- D. 9.30 m Discuss
Correct Answer: 12.30 m
- 4. The runway orientation is made so that landing and take off are
Options- A. against the wind direction
- B. along the wind direction
- C. perpendicular to wind direction
- D. none of these. Discuss
Correct Answer: against the wind direction
- 5. Pick up the correct statement from the following:
Options- A. Approximate geometric centre of the landing area, is called air port reference point
- B. The boundaries of horizontal surface and conical surface are marked with reference to air port reference point
- C. The location of the air port on a map is the position of air port reference point
- D. All the above. Discuss
Correct Answer: All the above.
- 6. The bearing of the runway at threshold is 290°, the runway number is
Options- A. N 70° W
- B. 290°
- C. 29°
- D. W 20° N Discuss
Correct Answer: 29°
- 7. According to the International Civil Aviation Organisation (I.C.A.O.) the strength of runway pavements, have been coded by
Options- A. Seven English alphabets
- B. Last Seven English alphabets
- C. First Seven English alphabets
- D. First seven numbers
- E. None of these. Discuss
Correct Answer: First seven numbers
- 8. Pick up the correct statement from the following:
Options- A. The centre line of the approach area coincides with that of the runway
- B. Approach areas are measured in horizontal surfaces
- C. The imaginary inclined plane which is directly above the approach area is called approach surface
- D. Obstruction clearance surface and approach surface are same
- E. All the above. Discuss
Correct Answer: All the above.
- 9. The best direction of a runway is along the direction of
Options- A. longest line on wind rose diagram
- B. shortest line on the wind rose diagram
- C. line clear of wind rose diagram
- D. none of these. Discuss
Correct Answer: longest line on wind rose diagram
- 10. Pick up the correct abbreviation from the following:
Options- A. I.L.S. (instrument landing system)
- B. V.H.F, (very high frequency)
- C. L.O.M. (low powered outer marker)
- D. L.M.M. (low powered middle marker)
- E. All the above Discuss
Correct Answer: All the above
More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.