Discussion
Home ‣ Chemical Engineering ‣ Process Control and Instrumentation Comments
- Question
Stroboscope is used for the measurement of
Options- A. rpm of a flywheel
- B. frequency of light
- C. depression of freezing point
- D. liquid level under pressure
- Correct Answer
- rpm of a flywheel
- 1. In Bode plot, A.R. vs. w is plotted on a/an __________ graph paper.
Options- A. log-lag
- B. triangular
- C. ordinary
- D. semi-log Discuss
- 2. Temperature of molten pig iron (1450°C) and molten slag (1500°C) flowing out of a blast furnace is measured by a/an
Options- A. chromel-alumel thermocouple
- B. optical pyrometer
- C. radiation pyrometer
- D. either (b) or (c) Discuss
- 3. What is the Laplace transform of sin t?
Options- A.
- B.
- C.
- D.
Discuss
- 4. Continuous measurement of specific gravity of a liquid is done by
Options- A. hydrometer
- B. contact-type electric indicators
- C. displacement meter
- D. both (a) and (c) Discuss
- 5. Emf developed by a thermocouple while measuring a temperature of 800°C is about 31 mV. The type of thermocouple used is
Options- A. chromel-alumel
- B. iron-constantan
- C. platinum-platinum+rhodium
- D. none of these. Discuss
- 6. Minute depression of freezing point of a liquid solvent on addition of a solid solute can be best measured by a
Options- A. Beckman thermometer
- B. dilatometer
- C. mercury thermometer
- D. bimetallic thermometer Discuss
- 7. Which of the following thermocouples has the least temperature measurement range?
Options- A. Copper-constantan
- B. Chromel-alumel
- C. Platinum-platinum/rhodium
- D. Iron-constantan Discuss
- 8. Continuous measurement of moisture content of paper in paper industry is done by measuring the
Options- A. thermal conductivity through the paper
- B. electrical resistance through the paper
- C. magnetic susceptibility
- D. none of these Discuss
- 9. Thermal well made of __________ gives the fastest speed of response, while measuring temperature by thermocouples.
Options- A. steel
- B. vycor (a glass)
- C. nichrome
- D. inconel Discuss
- 10. Working principle of mercury in glass thermometer is
Options- A. volumetric expansion.
- B. pressure rise with temperature.
- C. linear expansion.
- D. none of these. Discuss
Process Control and Instrumentation problems
Search Results
Correct Answer: log-lag
Correct Answer: either (b) or (c)
Correct Answer:
Correct Answer: both (a) and (c)
Correct Answer: chromel-alumel
Correct Answer: Beckman thermometer
Correct Answer: Copper-constantan
Correct Answer: electrical resistance through the paper
Correct Answer: vycor (a glass)
Correct Answer: volumetric expansion.
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.