logo

CuriousTab

CuriousTab

Discussion

Home ‣ Chemical Engineering ‣ Process Control and Instrumentation Comments
  • Question

  • Platinum resistance thermometer is the international standard for temperature measurement between


  • Options
  • A. triple point of hydrogen and freezing point of antimony
  • B. 13.81°K to 903.9°K
  • C. both (a) and (b)
  • D. neither (a) nor (b)

  • Correct Answer
  • both (a) and (b) 

    • Process Control and Instrumentation problems

    Search Results

    • 1. Liquid column manometers are used for measuring the pressure __________ kgf/cm2 .

    • Options
    • A. > 2(gage)
    • B. < 3 (gage)
    • C. < 10 (gage)
    • D. < atmospheric
      • Discuss
    • 2. Thermocouple is suitable for measuring

    • Options
    • A. liquid temperatures only.
    • B. very high temperatures only.
    • C. very low temperatures only.
    • D. both high and low temperatures.
      • Discuss
    • 3. Pick out the symbol for "locally mounted instrument" in instrumentation diagram.

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 4. Nickel percentage in invar which is an iron-nickel alloy, and is used as a thermocouple material is

    • Options
    • A. 12
    • B. 36
    • C. 54
    • D. 68
      • Discuss
    • 5. Pyrometry refers to the measurement of temperature

    • Options
    • A. with the mercurial thermometer upto 350°C.
    • B. directly.
    • C. which is of higher magnitude.
    • D. all (a), (b) & (c).
      • Discuss
    • 6. In second order underdamped system,

    • Options
    • A. decay ratio = overshoot
    • B. decay ratio = (overshoot)2
    • C. overshoot increases for increasing damping co-efficient.
    • D. large damping co-efficient means smaller damping.
      • Discuss
    • 7. Temperature of __________ can not be measured by an optical or radiation pyrometer.

    • Options
    • A. hot blast (air) from stoves
    • B. molten slag flowing out of blast furnace
    • C. combustion space in boilers
    • D. rotary limestone calcination kiln
      • Discuss
    • 8. Normal mercury thermometer can be used to measure a temperature of about 300°C. However, its maximum temperature measurement range can be increased upto about 500°C by

    • Options
    • A. filling nitrogen under pressure in the stem.
    • B. increasing the diameter of the tube.
    • C. using steel tube in place of glass tube.
    • D. accounting for the tube expansion.
      • Discuss
    • 9. The frequency at which maximum amplitude ratio is attained is called the __________ frequency.

    • Options
    • A. corner
    • B. resonant
    • C. cross-over
    • D. natural
      • Discuss
    • 10. For the time domain function f(t) = t, the Laplace transform of is given by

    • Options
    • A. 1/2 S3
    • B. 2/S3
    • C. 1/S3
    • D. 2/S2
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.