logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Process Control and Instrumentation Comments

  • Question
  • The amplitude ratio for the sinusoidal response of __________ is < 1.


  • Options
  • A. transportation lag
  • B. first order system
  • C. second order system
  • D. none of these

  • Correct Answer
  • first order system 


  • Process Control and Instrumentation problems


    Search Results


    • 1. __________ thermometer can not measure sub-zero (< 0° C) temperature,

    • Options
    • A. Mercury in glass
    • B. Bimetallic
    • C. Vapor pressure
    • D. Resistance
    • Discuss
    • 2. The unit step response of the transfer function 1/(s2 + 2s + 3)

    • Options
    • A. has a non-zero slope at the origin.
    • B. has a damped oscillatory characteristics.
    • C. is overdamped
    • D. is unstable
    • Discuss
    • 3. Paramagnetism method is not used for the composition determination of __________ in gases.

    • Options
    • A. oxygen
    • B. oxides of nitrogen
    • C. carbon dioxide
    • D. any of these
    • Discuss
    • 4. The amplitude ratio for the sinusoidal response of a __________ is 1.

    • Options
    • A. first order system
    • B. second order system
    • C. transportation lag
    • D. none of these
    • Discuss
    • 5. Which of the following judges the accuracy of an instrument?

    • Options
    • A. Dead zone
    • B. Drift
    • C. Static error
    • D. None of these
    • Discuss
    • 6. Which of the following controllers has maximum offset?

    • Options
    • A. P-controller
    • B. P-I controller
    • C. P-D controller
    • D. P-I-D controller
    • Discuss
    • 7. Liquid argon level in a pressurised storage tank (at 3 kg/cm2 ) is measured by a/an

    • Options
    • A. gage glass
    • B. external float gage
    • C. differential pressure gage
    • D. none of these
    • Discuss
    • 8. Starting temperature of optical radiation pyrometer is __________ °C.

    • Options
    • A. 800
    • B. 400
    • C. 1200
    • D. 1500
    • Discuss
    • 9. Magnetic flowmeters are generally not used for the velocity/flow measurement of hydrocarbons due to their

    • Options
    • A. low thermal conductivity.
    • B. low electrical conductivity.
    • C. high viscosity index.
    • D. low flash point.
    • Discuss
    • 10. The calibration data of a thermocouple with its cold junction at 0°C are given below.

      The hot junction of the thermocouple is placed in a bath at 80°C, while its cold junction is at 20°C. What is the emf of thermocouple?

    • Options
    • A. 3.26 mv
    • B. 0.80 mv
    • C. 2.46 mv
    • D. 2.43 mv
    • Discuss


    Comments

    There are no comments.

Enter a new Comment