Discussion
Home ‣ Chemical Engineering ‣ Petroleum Refinery Engineering Comments
- Question
The main purpose of recycling the byproduct hydrogen gas in the reformer reactor is to
Options- A. obviate catalyst poisoning.
- B. maintain the reaction temperature.
- C. sustain the reactor pressure.
- D. hydrogenate the feed stock.
- Correct Answer
- sustain the reactor pressure.
- 1. The general formula of naphthenes is
Options- A. CnH2n + 2
- B. CnH2n-6 (where, n ? 6)
- C. CnHn-4
- D. same as that for olefins i.e. CnH2n Discuss
- 2. Which of the following is an additive used for improving the cetane number of diesel?
Options- A. Tetraethyl lead
- B. Tetramethyllead
- C. Ethyl nitrate or acetone
- D. None of these Discuss
- 3. Hydrocracking employs
Options- A. high pressure & temperature.
- B. low pressure & temperature.
- C. high pressure and low temperature.
- D. high temperature and low pressure. Discuss
- 4. Pick out the correct statement pertaining to catalytic cracking.
Options- A. With increase in the reactor pressure, octane number of gasoline decreases.
- B. With increase in the reactor temperature, gasoline yield decreases for a given conversion.
- C. Percentage conversion increases with increase in the catalyst to oil ratio.
- D. all (a), (b) and (c). Discuss
- 5. Sour crude means the __________ bearing crude.
Options- A. asphalt
- B. sulphur compounds
- C. wax
- D. nitrogen compounds Discuss
- 6. Increase in the specific gravity of petroleum products indicates
Options- A. decrease in paraffin content.
- B. increase in thermal energy per unit weight.
- C. increase in aromatic content.
- D. higher H/C ratio. Discuss
- 7. Crude topping column operates at __________ pressure.
Options- A. atmospheric
- B. 10 atm
- C. vacuum
- D. 3 atm. Discuss
- 8. Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C?
Options- A. Naphtha
- B. Petrol
- C. Kerosene
- D. Heavy fuel oil Discuss
- 9. True vapour pressure of a petroleum fraction __________ Reid vapour pressure.
Options- A. is less than
- B. is more than
- C. is same as
- D. may be either more or less than Discuss
- 10. Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with
Options- A. methyl alcohol
- B. ethyl alcohol
- C. methane
- D. ethane Discuss
Petroleum Refinery Engineering problems
Search Results
Correct Answer: same as that for olefins i.e. CnH2n
Correct Answer: Tetraethyl lead
Correct Answer: high pressure & temperature.
Correct Answer: all (a), (b) and (c).
Correct Answer: sulphur compounds
Correct Answer: decrease in paraffin content.
Correct Answer: atmospheric
Correct Answer: Heavy fuel oil
Correct Answer: is more than
Correct Answer: methyl alcohol
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.