Discussion
Home ‣ Chemical Engineering ‣ Petroleum Refinery Engineering Comments
- Question
Catalyst used in the isomerisation is
Options- A. aluminium chloride
- B. alumina
- C. nickel
- D. phosphoric acid
- Correct Answer
- aluminium chloride
- 1. Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene?
Options- A. Reforming
- B. Pyrolysis
- C. Alkylation
- D. Hydrocracking Discuss
- 2. High aniline point of diesel indicates that, it
Options- A. is highly aromatic.
- B. has a large ignition delay.
- C. is highly paraffinic.
- D. has a low diesel index. Discuss
- 3. Petroleum coke is commercially produced by the __________ process.
Options- A. hydrocracking
- B. visbreaking
- C. fluid catalytic cracking
- D. delayed coking Discuss
- 4. Both asphalt and wax are produced by __________ base crude oils.
Options- A. naphthenic
- B. asphalt
- C. paraffin
- D. mixed Discuss
- 5. Name the endothermic reaction out of the following:
Options- A. Catalytic cracking.
- B. Hydrocracking.
- C. Dehydrogeneration of naphthene to produce aromatic.
- D. Catalytic polymerisation. Discuss
- 6. Petroleum coke is used mainly .in the
Options- A. discoloration of yellow glycerine.
- B. sugar refining.
- C. manufacture of carbon electrode.
- D. blast furnace for reduction of iron ore. Discuss
- 7. Pick out the correct statement.
Options- A. Paraffins have higher octane number than corresponding iso-paraffin.
- B. Paraffins have lower smoke point than aromatics.
- C. Suitability of kerosene as a fuel & as an illuminant may be determined by char value test.
- D. Aviation fuel should have very high cloud point. Discuss
- 8. In catalytic alkylation, higher iso-butane to olefin ratio gives
Options- A. low final boiling point product
- B. higher yield
- C. both (a) and (b)
- D. neither (a) nor (b) Discuss
- 9. Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is
Options- A. propane.
- B. diethylene glycol.
- C. aqueous solution (10% water) of diethylene glycol.
- D. methyl ethyl ketone (MEK). Discuss
- 10. In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process.
Options- A. 100
- B. 200-300
- C. 1000-10000
- D. 10 Discuss
Petroleum Refinery Engineering problems
Search Results
Correct Answer: Reforming
Correct Answer: is highly paraffinic.
Correct Answer: delayed coking
Correct Answer: mixed
Correct Answer: Dehydrogeneration of naphthene to produce aromatic.
Correct Answer: manufacture of carbon electrode.
Correct Answer: Paraffins have lower smoke point than aromatics.
Correct Answer: low final boiling point product
Correct Answer: aqueous solution (10% water) of diethylene glycol.
Correct Answer: 1000-10000
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.