logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Petroleum Refinery Engineering Comments

  • Question
  • In sweetening process, solutizer agent used with caustic alkali is


  • Options
  • A. potassium isobutyrate
  • B. sodium plumbite
  • C. methanol
  • D. phenol

  • Correct Answer
  • potassium isobutyrate 


  • Petroleum Refinery Engineering problems


    Search Results


    • 1. In case of liquid petrofuels, momentary combustion is observed at its

    • Options
    • A. flash point.
    • B. preheating temperature corresponding to viscosity of 25 centistokes.
    • C. flame temperature.
    • D. fire point.
    • Discuss
    • 2. Presence of sulphur in gasoline

    • Options
    • A. leads to corrosion.
    • B. increases lead susceptibility.
    • C. decreases gum formation.
    • D. helps during stabilisation.
    • Discuss
    • 3. Alkylation

    • Options
    • A. causes olefins to combine with each other.
    • B. causes olefins to combine with iso-paraffins.
    • C. converts iso-paraffin into olefin.
    • D. converts olefin into paraffin.
    • Discuss
    • 4. Polymerisation

    • Options
    • A. produces i-octane from cracked gases containing i-butane and butene.
    • B. causes olefins to combine with each other.
    • C. causes aromatics to combine with each other.
    • D. is aimed at producing lubricating oil.
    • Discuss
    • 5. Raw Kerosene has a smoke point of 15 mm. After it is subjected to dearomatisation by liquid SO2 extraction (Edeleanu process), its smoke point may become __________ mm.

    • Options
    • A. 5
    • B. 10
    • C. 25
    • D. 100
    • Discuss
    • 6. Molecular weight of crude oil is in the range of

    • Options
    • A. 100-120
    • B. 230-250
    • C. 450-550
    • D. 600-850
    • Discuss
    • 7. Which one is preferred for aircraft engine?

    • Options
    • A. High viscosity index lube oil.
    • B. Low viscosity index lube oil.
    • C. High freezing point aviation fuel.
    • D. None of these.
    • Discuss
    • 8. Pick out the correct statement about catalytic polymerisation.

    • Options
    • A. H2SO4 polymerisation process gives gasoline rich in unsaturates.
    • B. In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive.
    • C. both (a) and (b)
    • D. neither (a) nor (b)
    • Discuss
    • 9. In solutizer sweetening process, solutizer solution used is

    • Options
    • A. methanol in Unisol process.
    • B. naphthenic acid in Mercapsol process.
    • C. both (a) and (b).
    • D. neither (a) nor (b).
    • Discuss
    • 10. Solvent used in Edeleanu process is

    • Options
    • A. furfural
    • B. propane
    • C. liquid SO2
    • D. phenol
    • Discuss


    Comments

    There are no comments.

Enter a new Comment