Discussion
Home ‣ Chemical Engineering ‣ Petroleum Refinery Engineering Comments
- Question
Liquefied Petroleum Gas (LPG) is mainly a mixture of
Options- A. propane & butane
- B. methane & ethane
- C. high boiling olefins
- D. high boiling naphthenes
- Correct Answer
- propane & butane
- 1. Road grade bitumen is produced from vacuum residue by its
Options- A. aeration
- B. pyrolysis
- C. hydrogenation
- D. steam reforming Discuss
- 2. Catalyst used in alkylation process is
Options- A. sulphuric acid
- B. nickel
- C. silica gel
- D. alumina Discuss
- 3. Aromatics have the highes __________ of all the hydrocarbons of same carbon atoms.
Options- A. smoke point
- B. octane number
- C. cetane number
- D. viscosity Discuss
- 4. Higher vapour pressure of gasoline indicates
Options- A. low flash point
- B. high breathing loss
- C. both (a) and (b)
- D. neither (a) nor (b) Discuss
- 5. Pyrolysis of kerosene or natural gasoline is done to produce mainly the
Options- A. olefins and aromatics
- B. lighter paraffins
- C. stabilised gasoline
- D. diesel Discuss
- 6. "Breathing loss" on storage of gasoline occurs due to the
Options- A. presence of unsaturated air.
- B. fluctuation of ambient temperature during day and night.
- C. both (a) and (b).
- D. neither (a) nor (b). Discuss
- 7. Natural gas recovered along with crude oil from oil wells is called wet natural gas which has a higher __________ compared to the dry natural gas.
Options- A. unsaturated hydrocarbon content
- B. calorific value
- C. quantity of propane
- D. quantity of butane Discuss
- 8. Vacuum maintained in the vacuum distillation column in oil refinery is in the range of about __________ mm Hg absolute.
Options- A. 1 to 5
- B. 30 to 80
- C. 250 to 350
- D. 450 to 500 Discuss
- 9. Which of the following fractions of petroleum contains maximum sulphur?
Options- A. Diesel
- B. Gasoline
- C. Naphtha
- D. Atmospheric residue Discuss
- 10. Liquefied Petroleum Gas (LPG) in domestic use cylinders is in the liquid form. The density of LPG in liquid form is about __________ of that of water (i.e. 1 gm/c.c).
Options- A. one fourth
- B. one third
- C. half
- D. one eighth Discuss
Petroleum Refinery Engineering problems
Search Results
Correct Answer: steam reforming
Correct Answer: sulphuric acid
Correct Answer: octane number
Correct Answer: neither (a) nor (b)
Correct Answer: olefins and aromatics
Correct Answer: fluctuation of ambient temperature during day and night.
Correct Answer: calorific value
Correct Answer: 30 to 80
Correct Answer: Atmospheric residue
Correct Answer: half
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.