logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Petroleum Refinery Engineering Comments

  • Question
  • A multigrade lubricating oil means an oil having high


  • Options
  • A. viscosity index
  • B. viscosity
  • C. aniline point
  • D. flash point

  • Correct Answer
  • viscosity index 


  • Petroleum Refinery Engineering problems


    Search Results


    • 1. Water content in the crude oil as it comes out of oil well may be upto __________ percent.

    • Options
    • A. 2
    • B. 5
    • C. 10
    • D. 25
    • Discuss
    • 2. Pick out the wrong statement.

    • Options
    • A. A pale color of petroleum product indicates lower viscosity.
    • B. Color of petroleum products indicates the degree of refinement.
    • C. Lighter petroleum distillates are lighter in color than the heavier residual oils.
    • D. Flouroscene of oils helps to detect its adulteration.
    • Discuss
    • 3. Waxy crudes are treated with chemical additives mainly to

    • Options
    • A. depress its pour point
    • B. dissolve wax
    • C. precipitate wax
    • D. remove wax
    • Discuss
    • 4. Which is an anticing compound?

    • Options
    • A. Amyl nitrate
    • B. Alcohals
    • C. Mercaptans
    • D. Pyridine
    • Discuss
    • 5. Concentration of H2SO4 catalyst in alkyla-tion is kept between 90-98%, because H2SO4 having concentration

    • Options
    • A. less than 90% promotes polymerisation.
    • B. more than 98% promotes cracking.
    • C. both (a) and (b).
    • D. neither (a) nor (b).
    • Discuss
    • 6. Reforming converts

    • Options
    • A. olefins into paraffins
    • B. naphthenes into aromatics
    • C. naphthenes into olefins.
    • D. naphthenes into paraffin.
    • Discuss
    • 7. Ethyl mercaptan is added to the Doctor negative LPG for facilitating the detection of its leakage (by bad odour) to the extent of about __________ ppm.

    • Options
    • A. 1
    • B. 50
    • C. 5000
    • D. 10000
    • Discuss
    • 8. Reforming

    • Options
    • A. uses naphtha as feedstock.
    • B. does not much affect the molecular weight of the feed.
    • C. improves the quality & yield of gasoline.
    • D. all (a), (b) and (c).
    • Discuss
    • 9. __________ treatment is done for appreciable improvement in viscosity index of lubricating oil.

    • Options
    • A. Acid
    • B. Solvent extraction
    • C. Alkali
    • D. Clay
    • Discuss
    • 10. Which of the following is the easiest to crack?

    • Options
    • A. Paraffins
    • B. Olefins
    • C. Naphthenes
    • D. Aromatics
    • Discuss


    Comments

    There are no comments.

Enter a new Comment