logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Petroleum Refinery Engineering Comments

  • Question
  • Which is the most desirable component of a good quality kerosene?


  • Options
  • A. i-paraffins
  • B. Aromatics
  • C. n-paraffins
  • D. Naphthenes

  • Correct Answer
  • n-paraffins 


  • Petroleum Refinery Engineering problems


    Search Results


    • 1. Pick out the wrong statement.

    • Options
    • A. Aromatics have higher specific gravity than paraffins,
    • B. Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ?2) where, ? is the specific gravity of the fuel at 15.5°C.
    • C. Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre).
    • D. Higher specific gravity of petrofuels means higher C/H ratio.
    • Discuss
    • 2. The reservoir rock containing petroleum has

    • Options
    • A. low porosity
    • B. high permeability
    • C. high porosity
    • D. both (b) and (c)
    • Discuss
    • 3. Hydrofining is the most recent and effective method for the

    • Options
    • A. removal of sulphur.
    • B. improvement of smoke point.
    • C. reduction of breathing loss.
    • D. improvement of viscosity index.
    • Discuss
    • 4. Deoiling is the process of removal of oil from wax. It is done by the __________ process.

    • Options
    • A. solvent extraction
    • B. sweating
    • C. resettling
    • D. all (a), (b) & (c)
    • Discuss
    • 5. The doctor's solution comprises of sodium plumbite in

    • Options
    • A. alcohal
    • B. water
    • C. aqueous caustic soda
    • D. soda ash
    • Discuss
    • 6. Fuel oil is subjected to visbreaking to reduce its

    • Options
    • A. pour point
    • B. viscosity
    • C. pressure drop on pumping
    • D. all (a), (b) and (c)
    • Discuss
    • 7. Pour point of a petrofuel is

    • Options
    • A. multiple of 3°F.
    • B. multiple of 5°F.
    • C. 5°C below the temperature at which oil ceases to flow.
    • D. none of these.
    • Discuss
    • 8. Clay treatment of petroleum products

    • Options
    • A. decolorises & stabilises cracked gasoline.
    • B. desulphurise straight run gasoline & kerosene.
    • C. adsorb arsenic from feedstock to catalytic reforming.
    • D. all (a), (b) & (c).
    • Discuss
    • 9. LPG stands for

    • Options
    • A. liquid petroleum gas
    • B. liquified petrol gas
    • C. liquid petrol gas
    • D. liquefied petroleum gas
    • Discuss
    • 10. The terminology used for the bottom most product from the vacuum crude distillation unit is

    • Options
    • A. residual crude
    • B. residuum
    • C. reduced crude
    • D. petrolatum
    • Discuss


    Comments

    There are no comments.

Enter a new Comment