Discussion
Home ‣ Chemical Engineering ‣ Petroleum Refinery Engineering Comments
- Question
The most commonly used feed stock for the reforming reactor is
Options- A. heavy fuel oil
- B. residuum
- C. straight run gasdine
- D. casing head gasoline
- Correct Answer
- straight run gasdine
- 1. Detergent is added as an additive in engine lubricating oil to
Options- A. reduce deposit formation.
- B. keep contaminants in suspension.
- C. increase oxidation stability.
- D. prevent rusting. Discuss
- 2. Specific gravity of a petroleum product gives an indication of its
Options- A. degree of refinement.
- B. hydrocarbon content type (aromatic or paraffinic).
- C. ease of atomisation.
- D. sulphur content. Discuss
- 3. Cetane number of high speed diesel must be ?
Options- A. 30
- B. 45
- C. 75
- D. 95 Discuss
- 4. Which of the following has the highest octane number?
Options- A. Aromatics
- B. i-paraffins
- C. Naphthenes
- D. Olefins
- E. n-paraffins Discuss
- 5. LSHS is a type of furnace oil, which
Options- A. is more viscous than high viscosity furnace oil (HVFO).
- B. stands for low sulphur heavy stock.
- C. is an ideal fuel for metallurgical furnaces due to its lower sulphur content (< 1%).
- D. all (a), (b) and (c). Discuss
- 6. Petroleum
Options- A. is optically active.
- B. constitutes mainly of olefins.
- C. does not contain asphalt.
- D. does not contain aromatics. Discuss
- 7. 95% (by volume) of LPG at 760 mm Hg pressure will evaporate at __________ °C.
Options- A. 2
- B. -40
- C. 30
- D. 55 Discuss
- 8. Which is the most effective catalyst used in catalytic cracking of petroleum products?
Options- A. Iron oxide
- B. Nickel
- C. Vanadium pentoxide
- D. Zeolite Discuss
- 9. Smoke volatility index is equal to smoke point plus
Options- A. 0.42 x(% distilled at 204°C)
- B. 5 mm
- C. 0.84 x (% distilled at 204°C)
- D. 10 mm. approximately Discuss
- 10. Which of the following hydrocarbons of same carbon atoms has minimum smoking tendency?
Options- A. Paraffins
- B. Naphthenes
- C. Aromatics
- D. Iso-paraffins Discuss
Petroleum Refinery Engineering problems
Search Results
Correct Answer: reduce deposit formation.
Correct Answer: hydrocarbon content type (aromatic or paraffinic).
Correct Answer: 45
Correct Answer: Aromatics
Correct Answer: all (a), (b) and (c).
Correct Answer: is optically active.
Correct Answer: 2
Correct Answer: Zeolite
Correct Answer: 0.42 x(% distilled at 204°C)
Correct Answer: Paraffins
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.