Discussion
Home ‣ Chemical Engineering ‣ Mechanical Operations Comments
- Question
Use of grinding aids results in the
Options- A. enhanced production rate.
- B. finer products.
- C. both (a) & (b).
- D. neither (a) nor (b).
- Correct Answer
- neither (a) nor (b).
- 1. The capacity of a gyratory crusher is __________ that of a jaw crusher with the same gape, handling the same feed & for the same product size range.
Options- A. same as
- B. 2.5 times
- C. 5 times
- D. 10 times Discuss
- 2. A filter press is
Options- A. a batch filter.
- B. not suitable, if the liquid is the main product.
- C. having prohibitively high maintenance cost.
- D. not suitable for wide range of materials under varying operating conditions of cake thickness and pressure. Discuss
- 3. Xanthates are used in the froth floatation process as a/an
Options- A. conditioner
- B. frother
- C. collector
- D. activator Discuss
- 4. The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the
Options- A. venturi atomiser
- B. gravity settling chamber
- C. electro-static precipitator
- D. cyclone separator Discuss
- 5. Particle size range in which dust catcher (gravity settling chamber) works most effectively and efficiently is __________ microns.
Options- A. < 5
- B. 10 to 25
- C. < 74
- D. > 1000 Discuss
- 6. A __________ employs a set of screen across a flow channel for the separation of dirt/rust from a flowing liquid stream.
Options- A. thickener
- B. classifier
- C. strainer
- D. clarifier Discuss
- 7. The main differentiation factor between tube mill and ball mill is the
Options- A. length to diameter ratio.
- B. size of the grinding media.
- C. final product size.
- D. operating speed. Discuss
- 8. Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface.
Options- A. plane
- B. curved
- C. ribbed
- D. either (a) or (b) Discuss
- 9. Separation of a suspension or slurry into a supernatant clear liquid (free from particles) and a thick sludge containing a high concentration of solid is called
Options- A. classification
- B. sedimentation
- C. clarification
- D. decantation Discuss
- 10. The optimum moisture content in solids to be crushed/ground ranges from __________ percent.
Options- A. 3 to 4
- B. 8 to 10
- C. 10 to 15
- D. 15 to 20 Discuss
Mechanical Operations problems
Search Results
Correct Answer: 2.5 times
Correct Answer: a batch filter.
Correct Answer: collector
Correct Answer: electro-static precipitator
Correct Answer: < 74
Correct Answer: strainer
Correct Answer: length to diameter ratio.
Correct Answer: ribbed
Correct Answer: sedimentation
Correct Answer: 3 to 4
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.