logo

CuriousTab

CuriousTab

Discussion

Home ‣ Chemical Engineering ‣ Mechanical Operations Comments
  • Question

  • Pick out the correct statement.


  • Options
  • A. Plastic chips are called non-cohesive solids.
  • B. Kick's crushing law is, P/m = K . lnPick out the correct statement. Plastic chips are called non-cohesive solids. Kick's crushing law is
  • C. Communition is a generic term for size enlargement operation.
  • D. Energy required in kwh per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'.

  • Correct Answer
  • Kick's crushing law is, P/m = K . ln 

    • Mechanical Operations problems

    Search Results

    • 1. The specific surface of spherical particles is given by (where D and ? are diameter and density of particle).

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 2. Apron conveyors are used for

    • Options
    • A. heavy loads & short runs.
    • B. small loads & long runs.
    • C. heavy loads & long runs.
    • D. none of these.
      • Discuss
    • 3. Which of the following is not used as a filter medium in case of corrosive liquids?

    • Options
    • A. Nylon
    • B. Glass cloth
    • C. Metal cloth of monel or stainless steel
    • D. Cotton fabric
      • Discuss
    • 4. Pine oil and cresylic acid are used as __________ in the froth floatation process.

    • Options
    • A. frother
    • B. collector
    • C. depressor
    • D. conditioner
      • Discuss
    • 5. Which of the following is not an industrial screening equipment?

    • Options
    • A. Sharpies centrifuge
    • B. Vibrating screen
    • C. Grizzly
    • D. Trommel
      • Discuss
    • 6. With increase in drum speed, in a rotary drum filter, the filtration rate

    • Options
    • A. increases
    • B. increases linearly
    • C. decreases
    • D. is not affected
      • Discuss
    • 7. Arrange the following size reduction equipment in the decreasing order of the average particle size produced by each of them.

    • Options
    • A. Jaw crusher, Ball mill, Fluid energy mill
    • B. Ball mill, Jaw crusher, Fluid energy mill
    • C. Fluid energy mill, Jaw crusher, Ball mill
    • D. Fluid energy mill, Ball mill, Jaw crusher
      • Discuss
    • 8. The grinding in a hammer crusher takes place due to the

    • Options
    • A. attrition
    • B. impact
    • C. both (a) & (b)
    • D. neither (a) nor (b)
      • Discuss
    • 9. The cummulative mass fraction of particles smaller than size dj for a collection of Ni particles of diameter di and mass mi (i = 1, 2, 3, ...... ?) is given by

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss
    • 10. Float and sink test determines the possibility of cleaning of coal by a process based on the

    • Options
    • A. gravity separation
    • B. wettability
    • C. particle shape
    • D. none of these
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.