Discussion
Home ‣ Chemical Engineering ‣ Mechanical Operations Comments
- Question
Which one is a filter aid?
Options- A. Convas fabric
- B. Diatomaceous earth
- C. Calcined lime
- D. None of these
- Correct Answer
- Diatomaceous earth
- 1. Half the angle of nip, (?), for a roll crusher is given by (where, dr, dp and df are diameters of crushing rolls, feed particles and rolls gap respectively).
Options- A.
- B.
- C.
- D.
Discuss
- 2. Rittinger number which designates the new surface prduced per unit of mechanical energy absorbed by the material being crushed, depends on the
Options- A. state or manner of application of the crushing force.
- B. ultimate strength of the material.
- C. elastic constant of the material.
- D. all (a), (b) and (c). Discuss
- 3. Pick out the wrong statement pertaining to the turbine agitator.
Options- A. Recommended peripheral speed for the turbine agitator is 200-250 metres/minute.
- B. Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow.
- C. Generally, the diameter of the agitator is kept between l/3rd to l/6th of the tank diameter while the blade length is l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter).
- D. Turbine agitator should be located at a height not less than one agitator diameter length from the bottom. If the depth of liquid in the tank is more than twice the agitator diameter, two agitators should be used. Discuss
- 4. Fluid energy mill comes in the category of
Options- A. grinder
- B. crusher
- C. cutter
- D. ultrafine grinder Discuss
- 5. The reduction ratio for grinders is defined as(where, Df and Dp are average diameters of feed and product respectively).
Options- A. Df/Dp
- B. Dp/Df
- C. Df - Dp
- D. none of these Discuss
- 6. __________ conveyors are also called scrapers.
Options- A. Apron
- B. Screw
- C. Helical flight
- D. both (b) & (c) Discuss
- 7. Screen capacity is expressed in terms of
Options- A. tons/hr
- B. tons/ft2
- C. both (a) & (b)
- D. tons/hr-ft2 Discuss
- 8. In a size reduction crushing operation, the feed size is 10 to 50 mm, while the product size is 2 to 10 mm. This is a case of __________ crushing.
Options- A. primary
- B. secondary
- C. fine
- D. ultrafine Discuss
- 9. With increase in the capacity of screens, the screen effectiveness
Options- A. remains unchanged
- B. increases
- C. decreases
- D. decreases exponentially Discuss
- 10. To remove dirt from the flowing fluid, we use a
Options- A. coagulant
- B. gravity settler
- C. strains
- D. clarifier Discuss
Mechanical Operations problems
Search Results
Correct Answer:
Correct Answer: all (a), (b) and (c).
Correct Answer: Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow.
Correct Answer: ultrafine grinder
Correct Answer: Df/Dp
Correct Answer: both (b) & (c)
Correct Answer: tons/hr-ft2
Correct Answer: fine
Correct Answer: decreases
Correct Answer: strains
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.