Discussion
Home ‣ Chemical Engineering ‣ Polymer Technology Comments
- Question
Linear polymers are normally
Options- A. thermosetting.
- B. thermosplastic.
- C. elastometric.
- D. having extremely high softening point.
- Correct Answer
- thermosplastic.
- 1. The monomer for the production of neoprene rubber is
Options- A. acetylene
- B. chloroprene
- C. isoprene
- D. none of these Discuss
- 2. Which of the following is not a thermoplastic material?
Options- A. Epoxy polymer
- B. PVC
- C. Polystyrene
- D. Polythene Discuss
- 3. Hot drink (e.g, tea) cups are usually made of
Options- A. polystyrene
- B. polythene
- C. polypropylene
- D. PVC Discuss
- 4. __________ are produced by reacting polybasic acid (e.g. phthalic anhydride) with polyhydric alcohol (e.g., glycerol).
Options- A. Unsaturated polyester
- B. Alkyd resins
- C. Saturated polyester
- D. Amino resins Discuss
- 5. Thermoplastic resins usually
Options- A. remain hard as long as they are hot.
- B. can not be reclaimed from waste.
- C. permanent setting resins.
- D. less brittle than thermosetting resins. Discuss
- 6. Polystyrene is a light, transparent, thermoplastic material used for making
Options- A. toys and combs
- B. packaging bags
- C. non-sticking utensils
- D. electrical insulation Discuss
- 7. A copolymer is formed by the combination of two or more monomer molecules
Options- A. in a chain without the elimination of water.
- B. with the elimination of small amount of water.
- C. of the same monomer by elimination of small molecules of water.
- D. none of these. Discuss
- 8. Bristles of tooth brushes are made of
Options- A. nylon-6
- B. nylon-66
- C. polystyrene
- D. PVC Discuss
- 9. Polystyrene is a __________ plastic at room temperature.
Options- A. ductile
- B. brittle
- C. malleable
- D. none of these Discuss
- 10. Alkyd resin can not be used for making
Options- A. plasticiser
- B. paint & varnish
- C. fibres
- D. film forming materials Discuss
Polymer Technology problems
Search Results
Correct Answer: chloroprene
Correct Answer: Epoxy polymer
Correct Answer: polystyrene
Correct Answer: Alkyd resins
Correct Answer: less brittle than thermosetting resins.
Correct Answer: toys and combs
Correct Answer: in a chain without the elimination of water.
Correct Answer: nylon-66
Correct Answer: brittle
Correct Answer: fibres
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.