Discussion
Home ‣ Chemical Engineering ‣ Polymer Technology Comments
- Question
Vulcanisation of rubber
Options- A. decreases its tensile strength.
- B. increases its ozone & oxygen reactivity.
- C. increases its oil & solvent resistance.
- D. converts its plasticity into elasticity.
- Correct Answer
- converts its plasticity into elasticity.
- 1. Phthalic anhydride is used
Options- A. in making PVC
- B. as plasticisers
- C. in insecticides manufacture
- D. for making nylon-6 Discuss
- 2. The monomer of natural rubber is
Options- A. DMT
- B. isoprene
- C. 2 methyl-1-propene
- D. both (b) and (c) Discuss
- 3. Polycaprolactum is also known as
Options- A. nylon-66
- B. nylon-6
- C. teflon
- D. SBR Discuss
- 4. Teflon is
Options- A. phenol formaldehyde
- B. an inorganic polymer
- C. polytetra florouethylene (PTFE)
- D. a monomer Discuss
- 5. Polythene is a/an
Options- A. addition polymerisation product.
- B. condensation polymerisation product.
- C. thermosetting material.
- D. none of these. Discuss
- 6. __________ is produced by polymerisation of chloroprene.
Options- A. Thiokol (a polysulphide rubber)
- B. Butyl rubber
- C. Neoprene
- D. Polyurathane rubber Discuss
- 7. Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800?
Options- A. 50000
- B. 51600
- C. 49200
- D. 50800 Discuss
- 8. The starting material used for the manufacture of caprolactum is
Options- A. ethyl benzene
- B. cyclohexane
- C. ethylene glycol
- D. DMT Discuss
- 9. __________ is a copolymer.
Options- A. styrene butadiene rubber (SBR)
- B. Neoprene
- C. PVC
- D. None of these Discuss
- 10. Thermocole is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten
Options- A. saturated polyester
- B. polyurathane
- C. polystyrene
- D. either (b) or (c) Discuss
Polymer Technology problems
Search Results
Correct Answer: as plasticisers
Correct Answer: both (b) and (c)
Correct Answer: nylon-6
Correct Answer: polytetra florouethylene (PTFE)
Correct Answer: addition polymerisation product.
Correct Answer: Neoprene
Correct Answer: 50000
Correct Answer: cyclohexane
Correct Answer: styrene butadiene rubber (SBR)
Correct Answer: either (b) or (c)
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.