Discussion
Home ‣ Chemical Engineering ‣ Polymer Technology Comments
- Question
__________ polymer is produced by the copolymerisation of vinyl chloride-vinyl acetate.
Options- A. Fibrous
- B. Leathery
- C. Rubbery
- D. Hard
- Correct Answer
- Leathery
- 1. Ion exchange resins are made of
Options- A. lucite
- B. sulphonated bakelite
- C. polystyrene
- D. teflon Discuss
- 2. Chromite refractories are used in
Options- A. bottom of soaking pits.
- B. between acid & basic linings in basic open hearth furnaces to prevent their chemical action with each other.
- C. both (a) & (b)
- D. neither (a) and (b) Discuss
- 3. Fireclay bricks are used in the
Options- A. furnaces allowed to cool frequently
- B. flues
- C. chimney linings
- D. all (a), (b) and (c) Discuss
- 4. Dry mix hydraulic compositions of refractory aggregates with suitable bonding materials are called refractory
Options- A. mortars
- B. cements
- C. castables
- D. none of these Discuss
- 5. Refractory materials are never used in the construction of
Options- A. segar cones
- B. orton cones
- C. pressure vessels
- D. ovens & retorts Discuss
- 6. Polymethyl methacrylate, which is an acrylic resin, is also called
Options- A. thiokol
- B. plexiglass or lucite
- C. dacron
- D. teflon Discuss
- 7. Perspex can be used as a substitute of glass. Its monomer is
Options- A. methyl methacrylate
- B. DMT
- C. butadiene
- D. tetrafluroethylene Discuss
- 8. Low density polythene as compared to high density polythene is
Options- A. harder
- B. tougher
- C. chemically inert
- D. more flexible Discuss
- 9. Which of the following is stretched into fibres?
Options- A. Saturated polyester
- B. Unsaturated polyester
- C. Isoprene
- D. Bakelite Discuss
- 10. Pick out the correct statement.
Options- A. Plastics are good conductors of heat and electricity.
- B. All the polymers are highly crystalline in nature
- C. Polymers can be vaporised by heating to a very high temperature.
- D. The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation. Discuss
Polymer Technology problems
Search Results
Correct Answer: sulphonated bakelite
Correct Answer: both (a) & (b)
Correct Answer: all (a), (b) and (c)
Correct Answer: castables
Correct Answer: pressure vessels
Correct Answer: plexiglass or lucite
Correct Answer: methyl methacrylate
Correct Answer: more flexible
Correct Answer: Saturated polyester
Correct Answer: The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation.
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.