logo

CuriousTab

CuriousTab

Discussion


Home Chemical Engineering Refractory Technology Comments

  • Question
  • Fireclay bricks are used in the


  • Options
  • A. furnaces allowed to cool frequently
  • B. flues
  • C. chimney linings
  • D. all (a), (b) and (c)

  • Correct Answer
  • all (a), (b) and (c) 


  • Refractory Technology problems


    Search Results


    • 1. Dry mix hydraulic compositions of refractory aggregates with suitable bonding materials are called refractory

    • Options
    • A. mortars
    • B. cements
    • C. castables
    • D. none of these
    • Discuss
    • 2. Refractory materials are never used in the construction of

    • Options
    • A. segar cones
    • B. orton cones
    • C. pressure vessels
    • D. ovens & retorts
    • Discuss
    • 3. Pick out the wrong statement.

    • Options
    • A. Fluxing material like lime is added in clay to reduce the vitrification temperature.
    • B. Main constituents of clay are alumina and silica.
    • C. Addition of sand in ceramic materials makes it non-plastic, increases its fusion point and reduces its shrinkage on burning.
    • D. Vitrification of fireclay material is done to increase its porosity.
    • Discuss
    • 4. Pick out the wrong statement.

    • Options
    • A. Electrical conductivity of refractory is not important, when these are to be used in electrical furnaces.
    • B. Graphite and metals are the good electrical conductor among the refractories and others are all electrical insulators.
    • C. Refractories used for lining electrical furnaces should ordinarily have very low electrical conductivity.
    • D. Electrical conductivity of porous refractory material is low.
    • Discuss
    • 5. Lower part of hot metal mixer are lined with __________ bricks.

    • Options
    • A. superduty fireclay
    • B. high alumina
    • C. silica
    • D. carborundum
    • Discuss
    • 6. Chromite refractories are used in

    • Options
    • A. bottom of soaking pits.
    • B. between acid & basic linings in basic open hearth furnaces to prevent their chemical action with each other.
    • C. both (a) & (b)
    • D. neither (a) and (b)
    • Discuss
    • 7. Ion exchange resins are made of

    • Options
    • A. lucite
    • B. sulphonated bakelite
    • C. polystyrene
    • D. teflon
    • Discuss
    • 8. __________ polymer is produced by the copolymerisation of vinyl chloride-vinyl acetate.

    • Options
    • A. Fibrous
    • B. Leathery
    • C. Rubbery
    • D. Hard
    • Discuss
    • 9. Polymethyl methacrylate, which is an acrylic resin, is also called

    • Options
    • A. thiokol
    • B. plexiglass or lucite
    • C. dacron
    • D. teflon
    • Discuss
    • 10. Perspex can be used as a substitute of glass. Its monomer is

    • Options
    • A. methyl methacrylate
    • B. DMT
    • C. butadiene
    • D. tetrafluroethylene
    • Discuss


    Comments

    There are no comments.

Enter a new Comment