Discussion
Home ‣ Chemical Engineering ‣ Refractory Technology Comments
- Question
Pick out the wrong statement.
Options- A. Fluxing material like lime is added in clay to reduce the vitrification temperature.
- B. Main constituents of clay are alumina and silica.
- C. Addition of sand in ceramic materials makes it non-plastic, increases its fusion point and reduces its shrinkage on burning.
- D. Vitrification of fireclay material is done to increase its porosity.
- Correct Answer
- Vitrification of fireclay material is done to increase its porosity.
- 1. Pick out the wrong statement.
Options- A. Electrical conductivity of refractory is not important, when these are to be used in electrical furnaces.
- B. Graphite and metals are the good electrical conductor among the refractories and others are all electrical insulators.
- C. Refractories used for lining electrical furnaces should ordinarily have very low electrical conductivity.
- D. Electrical conductivity of porous refractory material is low. Discuss
- 2. Lower part of hot metal mixer are lined with __________ bricks.
Options- A. superduty fireclay
- B. high alumina
- C. silica
- D. carborundum Discuss
- 3. Segar cones are used for the determination of __________ of refractories.
Options- A. softening temperature
- B. spalling resistance
- C. electrical conductivity
- D. resistance to slag attack Discuss
- 4. Which of the following has the lowest electrical resistivity?
Options- A. Graphite
- B. Fireclay
- C. Alumina
- D. Zircon Discuss
- 5. Silica refractories are not used in
Options- A. coke oven walls.
- B. beehive coke ovens.
- C. dome and upper portion of B.F. stoves.
- D. open hearth furnace roof. Discuss
- 6. Refractory materials are never used in the construction of
Options- A. segar cones
- B. orton cones
- C. pressure vessels
- D. ovens & retorts Discuss
- 7. Dry mix hydraulic compositions of refractory aggregates with suitable bonding materials are called refractory
Options- A. mortars
- B. cements
- C. castables
- D. none of these Discuss
- 8. Fireclay bricks are used in the
Options- A. furnaces allowed to cool frequently
- B. flues
- C. chimney linings
- D. all (a), (b) and (c) Discuss
- 9. Chromite refractories are used in
Options- A. bottom of soaking pits.
- B. between acid & basic linings in basic open hearth furnaces to prevent their chemical action with each other.
- C. both (a) & (b)
- D. neither (a) and (b) Discuss
- 10. Ion exchange resins are made of
Options- A. lucite
- B. sulphonated bakelite
- C. polystyrene
- D. teflon Discuss
Refractory Technology problems
Search Results
Correct Answer: Electrical conductivity of refractory is not important, when these are to be used in electrical furnaces.
Correct Answer: carborundum
Correct Answer: softening temperature
Correct Answer: Graphite
Correct Answer: beehive coke ovens.
Correct Answer: pressure vessels
Correct Answer: castables
Correct Answer: all (a), (b) and (c)
Correct Answer: both (a) & (b)
Correct Answer: sulphonated bakelite
Comments
There are no comments.More in Chemical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.